Bell Ringer Posted July 16, 2020 Share Posted July 16, 2020 26 minutes ago, naggots said: My Puffin arrived yesterday. Fun settings that make a real change. @naggots have you downloaded the beta software? The ‘magic’ and vinyl grading options are fun. Well worth doing. Link to comment Share on other sites More sharing options...
naggots Posted July 16, 2020 Share Posted July 16, 2020 37 minutes ago, Bell Ringer said: @naggots have you downloaded the beta software? The ‘magic’ and vinyl grading options are fun. Well worth doing. I haven’t checked for beta firmware......It arrived with v1.2. Is there another?. The magic is really good, some of my dodgy albums are almost clear of noise. I haven’t tried the grading, will check it out. Link to comment Share on other sites More sharing options...
Bell Ringer Posted July 16, 2020 Share Posted July 16, 2020 Just now, naggots said: I haven’t checked for beta firmware......It arrived with v1.2. Is there another?. The magic is really good, some of my dodgy albums are almost clear of noise. I haven’t tried the grading, will check it out. He might have updated the beta to the latest version. Mines been out on loan for a month so can’t check which version I’ve got. Link to comment Share on other sites More sharing options...
Full Range Posted July 16, 2020 Share Posted July 16, 2020 7 minutes ago, naggots said: I haven’t checked for beta firmware......It arrived with v1.2. Is there another?. The magic is really good, some of my dodgy albums are almost clear of noise. I haven’t tried the grading, will check it out. The beta version has been finalised is now the full version The latest version is V1.20 2 Link to comment Share on other sites More sharing options...
MrBurns84 Posted July 16, 2020 Share Posted July 16, 2020 18 minutes ago, naggots said: I haven’t checked for beta firmware......It arrived with v1.2. Is there another?. The magic is really good, some of my dodgy albums are almost clear of noise. I haven’t tried the grading, will check it out. He upgrades the firmware before mailing out the units. Its the latest version -v 1.2 2 Link to comment Share on other sites More sharing options...
MrBurns84 Posted July 16, 2020 Share Posted July 16, 2020 @naggots - i tried mine with a borrowed lps vs my ifi 12vdc + ifi ipurifier2 vs the stock swithmode ps - i couldnt tell a difference between either of them. 2 Link to comment Share on other sites More sharing options...
naggots Posted July 16, 2020 Share Posted July 16, 2020 6 minutes ago, Porkbuns69 said: @naggots - i tried mine with a borrowed lps vs my ifi 12vdc + ifi ipurifier2 vs the stock swithmode ps - i couldnt tell a difference between either of them. Good to know. I’m pretty happy with it. The RCA cable strain would be my only concern but I doubt the build quality of my Aurealis cables will fail. 1 Link to comment Share on other sites More sharing options...
aussievintage Posted July 16, 2020 Share Posted July 16, 2020 13 hours ago, naggots said: my first thought was a Clay 12v LPS. I contacted Parks to ask if an LPS was worth it, he said it will make no difference as the noise floor is maxed with the supplied power supply. He was right IMHO. I would expect noise from the DSP (computer) section of the circuit, which is in the box with the analogue parts, would be MUCH higher than any residual noise from a switching supply. Therefore changing to a linear supply won't make any difference. 3 Link to comment Share on other sites More sharing options...
Ittaku Posted July 16, 2020 Share Posted July 16, 2020 13 hours ago, naggots said: I contacted Parks to ask if an LPS was worth it, he said it will make no difference as the noise floor is maxed with the supplied power supply. The manufacturer would know best but this doesn't happen often enough. I have great respect for any manufacturer that is this open about the details and isn't vague and skirt around the issue letting audiophiles go nuts changing components uselessly. 4 Link to comment Share on other sites More sharing options...
aussievintage Posted July 17, 2020 Share Posted July 17, 2020 2 hours ago, Ittaku said: The manufacturer would know best but this doesn't happen often enough. I have great respect for any manufacturer that is this open about the details and isn't vague and skirt around the issue letting audiophiles go nuts changing components uselessly. Yes it is refreshing isn't it 2 Link to comment Share on other sites More sharing options...
Volunteer sir sanders zingmore Posted July 17, 2020 Volunteer Share Posted July 17, 2020 (edited) 17 hours ago, Bell Ringer said: He might have updated the beta to the latest version. Mines been out on loan for a month so can’t check which version I’ve got. I'm the chap to whom @Bell Ringer very kindly loaned the puffin. He is a very generous fella and I'm most grateful that the spirit of SNA is alive and well. My thoughts on the unit are that it's a pretty remarkable bit of gear. I'm really impressed with how transparent it is. In its basic operation there is not a hint that you are going through a digital device. I was comparing it to the built in phono stage of my Sanders preamp which has seen off (in my opinion) some pretty serious competition. Honestly, the puffin wasn't quite as good, but for the price it came scarily close. I would certainly not hesitate to recommend it (particular as it is so flexible - my cart is low output Dynavector MC cart and the puffin didn't miss a beat) The digital side of it is really really cool. I liked the "magic" feature on some noisier records (although it does seem to introduce some artefacts to 'replace' some of the bigger clicks. it's interesting, they aren't nearly as obvious as the clicks but they sound less natural in a way). Smaller clicks and pops just disappear and slightly noisier records are far less fatiguing to listen to - fatigue that you might not have even been aware of. The 'tape' and 'tube' features are fun. But I wouldn't have much use for them as I dislike the idea of deliberately adding distortion. having said that, it is very well implemented and again sounds completely natural. My only gripe, and this is very personal and may in fact be a positive for many people, is that it is so damn configurable. There's EQ, there's tilt, there's bass boost, there's "air". It drove me nuts trying to tweak the sound and then worrying about whether the differences were actually better or worse. As I said, some people will absolutely love this so its a very personal gripe. Anyway, thanks again to @Bell Ringerfor giving me a chance to try this out Edited July 17, 2020 by sir sanders zingmore 4 Link to comment Share on other sites More sharing options...
Bell Ringer Posted July 17, 2020 Share Posted July 17, 2020 @sir sanders zingmore you are welcome. It’s definitely a fun bit of gear. Tweaker’s hell or paradise depending on your inclination. 2 Link to comment Share on other sites More sharing options...
jdjohn Posted July 21, 2020 Share Posted July 21, 2020 (edited) Hi guys, Nice to see an active thread about the Puffin. I need to get mine back out, and do both the firmware upgrade, and the SPDIF output upgrade. I remember my initial thoughts being it is remarkably quiet (as already mentioned in this thread), and a tweaker's delight/demise. Initially, I was only tweaking albums...but eventually, I was tweaking every song I also remember enjoying the harmonic feature and thinking, "Huh, so tubes can be applied via DSP". The vertical cable orientation was a bit of a nuisance for me...in my setup...but it can be mitigated. I think guitar players like the fact that it resembles a pedal effect. Anyway, I'm inspired to put mine back into the chain! EDIT: Btw, I want to reiterate how responsive Shannon Parks is with the emails. He seems to answer them all himself, at almost any hour, and that is quite impressive. Edited July 21, 2020 by jdjohn 3 Link to comment Share on other sites More sharing options...
naggots Posted July 21, 2020 Share Posted July 21, 2020 9 minutes ago, jdjohn said: Hi guys, Nice to see an active thread about the Puffin. I need to get mine back out, and do both the firmware upgrade, and the SPDIF output upgrade. I remember my initial thoughts being it is remarkably quiet (as already mentioned in this thread), and a tweaker's delight/demise. Initially, I was only tweaking albums...but eventually, I was tweaking every song I also remember enjoying the harmonic feature and thinking, "Huh, so tubes can be applied via DSP". The vertical cable orientation was a bit of a nuisance for me...in my setup...but it can be mitigated. I think guitar players like the fact that it resembles a pedal effect. Anyway, I'm inspired to put mine back into the chain! EDIT: Btw, I want to reiterate how responsive Shannon Parks is with the emails. He seems to answer them all himself, at almost any hour, and that is quite impressive. I added right angle RCA adapters to mine. My input cables from the TT were OK but the outputs were heavier and the adapters work out well. Agree with Shannons response time, even from Oz. 2 Link to comment Share on other sites More sharing options...
naggots Posted August 3, 2020 Share Posted August 3, 2020 These connectors take the strain off. 3 Link to comment Share on other sites More sharing options...
Cameron Miller Posted August 3, 2020 Share Posted August 3, 2020 I am fairly new to vinyl and am at the point where I upgrade the phono stage. Came across these in my search and it looks quite interesting. It seems that most of you don't have it as a main phono stage and it is more of a bit of fun every now and then. How does it stack up against something like a greham slee or ifi iphono2 as a main device? A hesitation I have is I am running a meridian digital system that converts everything to digital so adding this would go analog - digital - back to analog - back to digital Or Analog - didital 24/96 - downsample to 44 as it leaves the puffin. A analog preamp like the gs will get converted to digital by the meridian anyway but it's 24/96 and does a great job of it. I guess what I am asking is would you be happy with it as a main and should I be concerned about all the a2d2a2d conversion? Link to comment Share on other sites More sharing options...
Volunteer sir sanders zingmore Posted August 3, 2020 Volunteer Share Posted August 3, 2020 34 minutes ago, cambam007 said: I am fairly new to vinyl and am at the point where I upgrade the phono stage. Came across these in my search and it looks quite interesting. It seems that most of you don't have it as a main phono stage and it is more of a bit of fun every now and then. How does it stack up against something like a greham slee or ifi iphono2 as a main device? A hesitation I have is I am running a meridian digital system that converts everything to digital so adding this would go analog - digital - back to analog - back to digital Or Analog - didital 24/96 - downsample to 44 as it leaves the puffin. A analog preamp like the gs will get converted to digital by the meridian anyway but it's 24/96 and does a great job of it. I guess what I am asking is would you be happy with it as a main and should I be concerned about all the a2d2a2d conversion? Good questions @cambam007. I don't own a puffin but had one on extended loan from a kind member on SNA. My opinion for what it's worth, is that this is a serious device. Yes, it has a lot of "fun' features but that shouldn't distract from the fact that it's a very capable phono stage. The digital conversions are a separate issue. I think you'd be better off avoiding the second A2D conversion and just taking the digital out from the puffin - again my opinion is that 44 is fine and I imagine there will be less damage done by the Meridian upsampling to 24/96 than by the meridian covering analog to digital (I hav no real experience of this so it's just my gut feeling) As an alternative, you might consider a phono stage that outputs 24/96 in the first place. I'm sure there are others but, something like PS Audio https://www.psaudio.com/products/nuwave-phono-converter/#tab-description Link to comment Share on other sites More sharing options...
Full Range Posted August 3, 2020 Share Posted August 3, 2020 44 minutes ago, cambam007 said: I guess what I am asking is would you be happy with it as a main and should I be concerned about all the a2d2a2d conversion? I use the Puffin as a main phono stage The unit punches above its weight and is infinitely flexible Below is a mini review On 17/07/2020 at 1:49 PM, sir sanders zingmore said: My thoughts on the unit are that it's a pretty remarkable bit of gear. I'm really impressed with how transparent it is. In its basic operation there is not a hint that you are going through a digital device. I was comparing it to the built in phono stage of my Sanders preamp which has seen off (in my opinion) some pretty serious competition. Honestly, the puffin wasn't quite as good, but for the price it came scarily close. I would certainly not hesitate to recommend it (particular as it is so flexible - my cart is low output Dynavector MC cart and the puffin didn't miss a beat) The digital side of it is really really cool. I liked the "magic" feature on some noisier records (although it does seem to introduce some artefacts to 'replace' some of the bigger clicks. it's interesting, they aren't nearly as obvious as the clicks but they sound less natural in a way). Smaller clicks and pops just disappear and slightly noisier records are far less fatiguing to listen to - fatigue that you might not have even been aware of. The 'tape' and 'tube' features are fun. But I wouldn't have much use for them as I dislike the idea of deliberately adding distortion. having said that, it is very well implemented and again sounds completely natural. 1 Link to comment Share on other sites More sharing options...
Cameron Miller Posted August 3, 2020 Share Posted August 3, 2020 31 minutes ago, sir sanders zingmore said: Good questions @cambam007. I don't own a puffin but had one on extended loan from a kind member on SNA. My opinion for what it's worth, is that this is a serious device. Yes, it has a lot of "fun' features but that shouldn't distract from the fact that it's a very capable phono stage. The digital conversions are a separate issue. I think you'd be better off avoiding the second A2D conversion and just taking the digital out from the puffin - again my opinion is that 44 is fine and I imagine there will be less damage done by the Meridian upsampling to 24/96 than by the meridian covering analog to digital (I hav no real experience of this so it's just my gut feeling) As an alternative, you might consider a phono stage that outputs 24/96 in the first place. I'm sure there are others but, something like PS Audio https://www.psaudio.com/products/nuwave-phono-converter/#tab-description Thanks for chiming in, that psaudio looks fantastic and darko even bought one for himself! The meridian has an excellent a/d converter so I am not really in need of an external unit for this. Any analog pre will suffice and the meridian will spit out bit perfect 24/96 The puffin is attractive as it is relatively cheap and from what everyone says the fun settings are worth the ticket price. I guess I'm interested in anyone's experiences with using an external dac, being a digital guy I prefer to keep those bitrates high Link to comment Share on other sites More sharing options...
Cameron Miller Posted August 3, 2020 Share Posted August 3, 2020 I think I'm sold on it, if any of you gents have one for sale let me know 1 Link to comment Share on other sites More sharing options...
Cameron Miller Posted August 5, 2020 Share Posted August 5, 2020 I just spoke to Shannon and he has made a revision to the digital coax. As of last week all factory fitted units will be 24/96 spdif out. Unfortunately diy is not available at this bit rate Sealed the deal for me 2 Link to comment Share on other sites More sharing options...
mike29a Posted September 5, 2020 Share Posted September 5, 2020 On 05/08/2020 at 10:22 AM, cambam007 said: I just spoke to Shannon and he has made a revision to the digital coax. As of last week all factory fitted units will be 24/96 spdif out. Unfortunately diy is not available at this bit rate Sealed the deal for me DIY will be available at this rate when Amazon sells all its old units. Probably around mid September (as Shannon said) Link to comment Share on other sites More sharing options...
Cameron Miller Posted September 5, 2020 Share Posted September 5, 2020 Postage is a killer at the moment, ordered one a month ago and still waiting Link to comment Share on other sites More sharing options...
mike29a Posted September 10, 2020 Share Posted September 10, 2020 Can anyone tell me the voltage of Puffin please? Thanks Link to comment Share on other sites More sharing options...
Full Range Posted September 10, 2020 Share Posted September 10, 2020 7 minutes ago, mike29a said: Can anyone tell me the voltage of Puffin please? Thanks 12 V DC - 1.25 amps 1 Link to comment Share on other sites More sharing options...
Recommended Posts