Search the Community

A very superficial/brief description if I may: This product transmits content from a portable device to your earphones via a Bluetooth codec referred to as aptX-HD. aptX-HD is desirable over the standard SBC codec as it allows a higher bit-rate of 576 kbit/s and supports high-definition audio up to 48 kHz sampling rates and sample resolutions up to 24 bits. The below outlines the inbuilt amplification and digital-to-analogue converter specifications I've taken from the Amazon listing: 24bit Bluetooth receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers. Dimension 1 x 2 x 0.5 inch / Weight 20g / 14 hours of continuous playback / Dedicated app featured with 10 band EQ and Ambient mode / USB audio playback / device firmware update Including 2 independent Hi-fi DACs and Amplifiers (Asahi Kasei AK4375a) – the optimal Dual DACs/AMP design for both single-ended and full-differential outputs Analog volume control allows to keep the optimal audio performance even at low volume level using Programmable Gain Amplifier (PGA) which is known for the best way to control the volume. Built-in microphone supports answering calls while using earphones without a microphone I currently have one en-route (via ShopMate as it doesn't ship directly to Australia) and wanted to raise awareness/start a discussion on this relatively new product as it looks quite promising. *I've hyperlinked the important stuff

The Bludento BLT-HD is a Bluetooth streamer/DAC that includes Qualcomm aptX and aptX HD streaming protocols. It easily pairs with your phone and enable direct streaming from your smartphone to your stereo / home theatre system. I used it when exploring streaming technology into a mainstream hi-fi system and I was very impressed at the performance, especially considering its low cost. I have long ago moved onto another streamer that enables me to stream NAS-stored files as well as streaming services, hence this is no longer required. It contains a Texas Instruments PCM5102A DAC and also has SPDIF and optical digital outputs so you are free to use an alternative DAC and retain this as a convenient streamer. Specifications: Bluetooth version 5.0 BT range up to 30 metres Supported Codecs: aptX, aptX Low Latency, aptX HD, SBC, AAC, FLAC, TFF, MP3 Outputs: Stereo analog RCA, Optical digital (Toslink) 24-bit, SPDIF digital Input Power: 5V DC (not supplied), 200 mA micro-USB (supplied) Output Voltage: 2.1 V RMS Output Impedance: 57 Ohms DAC: Texas instruments PCM5102A Freq Response: 10 Hz - 20 kHz (+/- 0.5 dB) Signal to Noise Ratio: 112 dB THD: < 0.02% Latency: 30 milliseconds Included: BLT-HD unit, cheap included RCA-RCA leads, RCA-3.5 mm audio adapter, micro USB cable, User Guide Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item - if you have previously sold items and not made a donation, your advertisement may not be approved.

Item: Roksan K3 Integrated Amplifier (2016) - price reduction Location: Southern Suburbs of Perth Price: $2,100 ONO $1900 ONO Item Condition: excellent, 9/10 Reason for selling: upgraded Payment Method: Pickup - Cash or Pay ID / electronic transfer. I also have the original packaging, so can ship if required (postage / courier at your cost with relevant insurance) Extra Info: Purchased brand new from Frank Prowse HiFi in December 2016. Very well regarded integrated amplifier that has served me well, with balance of manufacturers warranty (until December 2021). The Roksan has proven to be quite flexible in terms of system synergy, and has provided great results with a variety of speakers including Dynaudio C1 and Monitor Audio GS60's. One of the key things i was looking for was the ability to seamlessly integrate it into a home theatre set up- the HT bypass works fantastically in this regard. It also offers the convenience of AptX bluetooth streaming for less critical listening sessions. lots of information on the web, but these reviews give you a good idea of how it performs - https://www.whathifi.com/roksan/k3-integrated/review https://blog.richersounds.com/roksan-k3-amp-review/ thanks for looking - any questions please message me! Photos:

Item: Peachtree Audio BT1 Bluetooth AptX Receiver Apt-X BT-1 Location: Melbourne Price: $100 pickup. Can post for $15 extra Australia wide Item Condition: Excellent Reason for selling: Rarely use Bluetooth now. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: - The best quality output is the Optical/Toslink output (see photos of the rear of the unit). Doesn't come with an optical cable in this sale. - Power cables and Aussie power plug and analogue output cables are included though (see photos). Original boxing included. - See more info here: http://www.peachtreeaudio.com/bt1-bluetooth-receiver.html - And more info here: http://melbournehifi.com.au/products/peachtree-audio-bt1-aptx-bluetooth-receiver Pictures: