Further Information: 

Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735

 

At Musical Fidelity we think of the M6si as being a destination product. The M6si offers such excellent performance, facilities and power that unless you are seeking the most exotic high-end sound quality you would never need another amplifier. We believe it’s that good.
Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework.
The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.
The M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease.
In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well. If we sound rather enthusiastic it’s because we are.

 

Features
220WPC
Excellent technical performance
Amazing load driving ability, unconditional stability will drive any loudspeaker
Wide range of useful inputs including asynchronous USB and switchable MM / MC Phono
Preamp output
Internally it is a separate preamp with two independent monobloc power amps; effectively a separates system in a box
Excellent, hunky build quality

 

Specifications
Amplifier
Power output: 220 Watts per channel into 8 Ohms
THD (+ noise): <0.007 % typical 20Hz - 20 kHz
Signal to Noise Ratio: >107dB ‘A’ - weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz
Inputs
4x Line Level RCA
1x Line Level XLR Balanced
1x USB type ‘B’ connector - asynchronous data stream at up to 24-bit/96kHz
1 x switchable phono input
Trigger in
Phono Input
Sensitivity: 3mV nominal (MM), 0.4mV nominal (MC)
Signal / noise ratio: >84dB ‘A’-weighted
Input impedance: 47k Ohms (MM and MC)
Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz
Outputs
Trigger out
General
Dimensions - WxHxD (mm): 440 x 125 x 400
Weight (unpacked / packed): 16.6 kg/ 21.3 kg

What a thing of beauty. MM/MC input as well. I wish I was in the market. GLWS.

Beautiful 

Do you have all the original box and packaging materials?

 

Is this unit an "Australian" one, or was it a grey market import?

 

Thanks.

Edited January 10, 20242 yr by Antipodean Brad