Jump to content

Class A Audio

Commercial Member
  • Posts

    373
  • Joined

  • Last visited

Reputation

148 Good

9 Followers

Profile Fields

  • Region
    Australia
  • Location
    Melbourne

Recent Profile Visitors

6,369 profile views
  1. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 The E-460 represents a modelchange from the popular E-450. It incorporatesthe sophisticated technological know-howgained by Accuphase over the years, andfeatures a further refined AAVA volume control.It also marks a return to MOS-FET devices inclass A/B integrated amplifier from Accuphase. AAVA is a revolutionary principle that redefinesthe concept of volume control from the groundup. Unlike the digital approach involving A/Dand D/A processing, it operates purely in theanalog domain for high performance andultimate sound. Because the amplification andvolume control tasks are integrated in a singleelectronic entity without any variable resistors,performance and sonic purity do not deteriorateover the years, providing excellent reliability. The power amplifier section is built as anadvanced instrumentation amplifier, whichenables fully balanced signal transmissionthroughout. Together with the further improvedMCS+ circuit topology and the highlyacclaimed current feedback principle, thismakes for even better electrical characteristics. In the output stage, high-power MOS-FETdevices renowned for their great sound andutter reliability are arranged in a triple parallelpush-pull configuration per channel. MOSFETshave excellent frequency response andhigh input impedance which reduces the loadon the preceding driver stage. Features Revolutionary AAVA volume control Output stage with triple parallel push-pull power MOS-FETs delivers high quality power: 180 watts x 2 into 8 ohms Instrumentation amplifier principle for power amplifier input stage allows fully balanced signal transmission, amplifier stage uses current feedback and MCS+ topology Logic-control relays for straight and short signal paths Robust power supply with large high-efficiency toroidal transformer and filtering capacity Specifications Power output: 180 watts per channel into 8Ω (stereo) Frequency response: 3Hz to 150kHz Total harmonic distortion: 0.05% Damping factor: 200 Input sensitivity: 0.15mV (MC), 3mV (MM), 190mV (line) Signal to noise ratio: 107dB (line) Dimensions: 465 x 181 x 428mm Weight: 24.4kg Accessories: remote control
  2. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 CAV-180 is a Classe multichannel amplifier. It is a five channel amplifier which deliviers 180 watts per channel into 8 ohms and 360 watts into a 4 ohm load. With a design inspired by the reference CAV-500, the CAV-180 offers a top level of quality in a mid-priced multichannel amplifier. The power supply of the CAV-180 includes a large toroidal transformer and a large cluster of capacitors allow current to be supplied immediatedly when required. A fast, clean power supply allows us a higher degree of accurate voltage regulation throughout the circuitry. This ensures that no matter how dynamic the program material is, and no matter what the sound pressure level is, the voltages at the various stages of amplification will remain steady. The Classé CAV-180 is the ideal partner for almost any loudspeaker forming part of a multi-channel system. With high-rated outputs and oversized power supplies to deliver the current, the Classé CAV-180 multi-channel power-amplifier offers an effortless sound quality and a totally engaging listening experience. Specifications CAV-180 MULTI-CHANNEL AMPLIFIER Frequency response +_ 0.1db 20Hz-20kHz Distortion THD+noise 0.003% Output Watts per channel into 8 ohms 5x180 Watts per channel into 4 ohms 5x360 Power supply Transformer size 1,000VA Number of capacitors 22 Total capacitance 123,200µF Input sensitivity Single-ended 1.35V/(volts for full output/impedance) 100K Balanced 1.35V/(volts for full output/impedance) 100K Weight & measurements Net weight 44.5kg 98lbs Height 241mm 9.5” Width 435mm 17.1” Depth 546mm 21.5”
  3. Would you like brand new generation? https://www.classaaudio.com.au/integrated-amplifier/2491-melody-mda2-integrated-tube-amplifier.html
  4. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 C2 Platinum Cutting-edge acoustic technology meets traditional Dynaudio heritage The Confidence C2 serves up seamless balance, effortless control and the kind of sound that will keep you glued to your seat The slimline C2 Platinum adapts our reflection-conquering DDC tech to a more compact floorstanding design. The drivers comprise two 17cm mid/bass drivers, matched to twin 28mm Esotar2 tweeters – all designed to deliver seamless integration, unparalleled staging and a real sense of Being There. Like the C4 Platinum, the C2 features adjustable spikes hidden in the base for fine-tuning their position in your room, while concealed speaker-cable connectors in the back keep everything neat. After all, your eyes should be on the speakers – not the wiring. What’s Dynaudio Directivity Control? Much like motor-racing technology ends up in your family car, we’ve taken the expertise we’ve gained from decades of building professional monitors for major recording studios and applied it to home audio. It’s all about compensating for floors and ceilings – which reflect the sound coming from your loudspeakers and introduce distortions and time delays. It’s those effects that colour the sound you hear – and while a splash of colour is lovely on the wall, you don’t want it in your music. We utilised Dynaudio Directivity Control (DDC) in the Confidence Platinum C4 and C2 to minimise those unwanted distortions. The vertical symmetrical driver array and sophisticated crossover are designed to reduce the energy dispersed to floors and ceilings by up to 75%. That means more of it comes directly to you in your seat, and makes the speakers far less dependent on the room they’re in. It isn’t just a driver arrangement, though: every part of the signal chain is optimised for the technology. Each tweeter complements each woofer in frequency response and phase relationship. Each crossover component is precisely selected for the job. And on the floorstanding speakers in the Confidence Platinum range, we make sure each set of drivers and crossover parts is precisely matched to the other – so they work in tandem. The Confidence Platinum models are available in the finishes established with the Evidence Platinum: Mocca - Bird’s-eye maple real wood veneer stained in dark brown, finished with clear piano lacquer Specifications Sensitivity: 87dB (2,83V / 1m) IEC Power Handling: 300W Impedance: 4 Ohms Frequency Response (± 3 dB): 28Hz – 25kHz Box Principle: Bass Reflex Rear Ported Crossover: 2 (3) way Crossover frequency: 2200, (8000)Hz Crossover Topology: 1st order Woofer: 2 x 17cm MSP Tweeter: 2 x 28mm Esotar² Weight: 40kg / 88lb Dimensions (W x H x D): 238 x 1532 x 445mm 9.4 x 60.3 x 17.5in Dimensions with feet/grill (W x H x D): 420 x 1532 x 475mm 16.5 x 60.3 x 18.7in
  5. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 BP-26 Stereo Preamplifier The Bryston BP26 preamplifier offers a significant step forward in capturing the subtleties, nuances, and emotions of recorded music. All aspects of the signal flow are enhanced with lower noise and distortion figures, and higher load levels, offering a rich and vibrant audio experience. Features 2 Balanced XLR inputs 5 Single ended RCA inputs Fully discrete Class A analog circuitry XLR and RCA Output Tape Loop Steel cabinet shielding to reduce EMI Gold plated switch, contacts, and connectors Outboard MPS-2 or PS-3 power supply required (see Power Supply in Specialty Products)* Specifications Dimensions: 17” (or 19”) x 2.25” x 11” 43.18cm x 5.7cm x 28cm Weight: 12.4 lb. (5.62Kg) Frequency Response: 20Hz-20kHz +/- .05dB THD: <0.0015% at 3 volts out Noise -100dB (Ref. 500mV RCA 20-20kHz) -103dB (Ref. 1 volt XLR 20-20kHz) MPS-2 Multi-Output DC Regulated Power Supply How important is the power supply to audio equipment? After all, amplified audio is nothing more than modulated power from the wall that's been rectified, filtered, and smoothed along the way. Bryston's quest to make the perfect power supply has resulted in two models-the PS-3 and MPS-2. Each is an ideal DC power supply to attached equipment giving them smooth, clean, DC power to modulate with incoming audio. These are mandatory power supplies for some equipment we manufacture and are not intended for use with other gear. Features Powers select Bryston equipment such as BP-2 phono stage, BP-26 preamplifier and others. 4 outputs for up to 4 attached components Huge new ultra-low-noise power transformer 68000 MFD of Capacitance Quick connect 12 volt trigger output Switchable ‘mute’ triggers on each of the 4 outputs Re-settable automatic overload protection on each output Specifications Dimensions Inches: 17 or 19 W x 2.75 H x 11 D Weight 15.5 lbs Power Connections: 1 IEC320 input, 4 XLR-6 DC Output Notice: Only for use with Bryston audio devices
  6. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 Feed Your System Pure, Clean, Regenerated Power With the PS Audio PerfectWave P10 Power Plant Power Conditioner: 1200W of Continuous Power, Hear More Music, Control, Detail, and Dynamics Put a personal power plant in your listening room and discover the irreplaceable merits of clean, regenerated power with the PS Audio PerfectWave P10 Power Plant power conditioner. The logic behind this exceptional power conditioner is simple: When you start with the cleanest-possible AC source, all your components deliver their best sound. In essence, the quality of incoming power directly translates to the quality of the sound coming out of your speakers. Built in the U.S.A., P10 takes the power coming in through your wall, rectifies, stores, and regulates it, and then uses it to generate a better AC signal it delivers to your system. It improves every aspect of audio/video performance and provides all the current necessary to reproduce even the toughest dynamic swings with the lowest-possible noise floor. In other words, without P10, your system is not delivering the performance it can – and for which you paid. You'll hear no noise, no EMI/RFI, and no artifacts. But you will hear more music, more detail, more body, more tones, more harmonics, more dynamics, and more of everything that will further involve you with your favorite recordings. 100% Music Direct Guaranteed. "We have never heard [music] delivered with such clear characterization of each element or more precise control of its position within the soundstage. Neither have we previously experienced such assurance, such a sense of accurate transcription of the master tape. There's good reason to suppose that with most audio equipment it will have an effect ranging from positive to positively startling!" – Hi-Fi News, Outstanding Product Award Featuring five separated regenerated zones and able to provide 1500 watts of pure regenerated power (1200W continuous), P10 handles any size system that crosses its path. Its pure power is internally generated with a fully analog power amplifier. P10 also boasts PS Audio advances such as MultiWave and CleanWave technology, high-current soft start, and the ability to monitor your power quality and performance from the touchscreen front panel. If you wish, once your system is powered by a P10, all you or you need to do is go to the web through any web-enabled device and access the control panel. From there, any connected equipment can be rebooted, turned on or off, or have its status checked. You can do this from anywhere in the world. See what your power is doing with greater depth and accuracy. PS Audio even built an oscilloscope into the touchscreen. It's that simple. "When the PerfectWave P10 Power Plant was feeding my entire system, I experienced exceptional musical moments more often, finding myself sitting up and taking notice of some musical detail." – Jim Austin, Stereophile How P10 Differs from Traditional Power Conditioners, and Why It's Better P10 is a personal AC generator that provides hard-working, perfected results from the AC power line. Power regeneration uses active components, like those found in large and powerful audio amplifiers, to rebuild the AC power and produce clean, clear, distortion free, regulated AC to the equipment. P10 also provides excellent protection and cleaning of radio, cellphone, and computer interference. But more importantly, regeneration provides a steady, regulated, low-impedance source of pure AC unaffected by the equipment's demands for power. The key to P10's success and what makes it so unique is the way it makes the power better. Instead of simple filtering, as a legacy power conditioner does, P10 actually repairs the main power issues actually caused by the equipment itself: dynamic fluctuations. These occur with nearly every power amplifier or receiver on the market. When a loud musical passage is reproduced, the power amplifier draws more power from the wall to feed the loudspeakers. When this occurs, the voltage at the wall decreases in direct relationship with the loudness of the musical passage. Louder is worse. If the system is powered from a Power Plant AC regenerator, the problem is eliminated. Dynamic voltage fluctuations are stopped completely, the power amp receiving perfectly regulated, steady AC power regardless of the demands from the power amplifier. In a high-end system, where perfection is hoped for and compromise is not an option, the improvements brought by P10 are instantly recognized with a simple audition that shows both with and without perfected power. "I knew it was possible that fixing my power would make my music cleaner and more accurate. What I didn't anticipate was that it would make the music so much more engaging. Maybe more accurate is more engaging – an appealing thought. Anyway, the PerfectWave P10 Power Plant may be an essential accessory for any audiophile...I'm going to have a hard time sending this back!" – Jim Austin, Stereophile Passive Cooling Results in Low Noise Floors and Black Backgrounds P10 is passively cooled via gorgeous and expensive heat sinks. By eliminating fans, P10 is able to reduce the noise floor even further, delivering the blackest backgrounds of any Power Plant ever. Also, because of the reduced dependance on fans to provide cooling, P10 can be biased for a bit more power, allowing it to deliver a full continuous 1200W. Added to this, P10 includes PS Audio's best AC outlets: Power Port Premier for additional resolution and a fuller, richer tonal balance. All this performance is packaged in one of the most beautiful and striking chassis PS Audio has ever created. Specifications Nominal Input Voltage: 95-145VAC Maximum Continuous Load: 1200VA Maximum Peak Load: 1500VA Voltage Regulation: +/- 0.5V Output Distortion: Input 110-130VAC: 1200VA Resistive Load <0.5% Input 110-130VAC: 12000VA Reactive Load <0.5% Output Impedance: Noise Reduction (all zones): 100KHz-2MHz >80dB Efficiency @ 1200VA: Resistive Load: > 85% Reactive Load: > 85% Input Frequency: 45-56Hz Under Voltage Limit: Continuous: -10% of setting 15 Sec Duration: -15% of setting Over Voltage Limit: Continuous: 5% of setting 15 Sec Duration: 10% of setting Energy Dissipation: 2440 Joules Peak Current Surge: 144,000A Max Surge: 6,000 Volts Clamp Level: 330V Telco Protection: 320 Joules 395 volts Coax Insertion loss: <1dB DC Trigger config: Tip Positive DC Trigger Voltage: 5-15 volts DC Dimensions (WDH): 17" x 14" x 9" Weight: 73 lbs.
  7. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 Quite literally in a class of its own, the Cambridge Audio 851A Class XD integrated stereo amplifier is designed to offer power, finesse and astonishingly low distortion. At its heart lies Cambridge Audio's proprietary Class XD technology, which has been refined and enhanced since its inception in the 840 series, allowing even greater musical detail to be delivered to your speakers. Like all Cambridge Audio products, the 851A adheres to three core values: stunning performance, ease of use and incredible value. Power To The People: Capable of delivering an enormous 120 Watts of high-quality power, it benefits from two audiophile-grade mains transformers: one for the sensitive preamp section and one for the power stages allowing the 851A to deliver its immense output without stress. This incredible speaker-taming amount of power can be precision-controlled with another innovation found in the 851A – the new fully balanced silicon gate volume control, which gives very fine adjustment across the volume range and highly accurate channel-balancing. Connectivity: Because everyone’s needs are different, the 851A offers two main types of connectivity: the more commonly found RCA/Phono inputs, plus two pairs of fully balanced XLR connections. The matching 851C upsampling CD player also features both types of connection, allowing you to connect your system in the very highest quality possible. Finishing Touches: The casework is more than just an exercise in great design, too. The full-metal chassis is acoustically damped for greater performance, with a striking yet robust brushed-metal fascia. And because everyone chooses different source components, Cambridge Audio has developed an intuitive display which enables you to customise the names of your components – CD player, PC, TV etc. removing that perennial problem of having to remember which device is connected to which input! Unlike many high end amplifiers which excel in one area over another, the 851A offers the perfect combination of high performance, flexibility and ease of use. It’s designed to take your listening experience to an entirely different level. Specifications Design: Stereo Integrated Amplifier Power Output: 2 x 120 Watts RMS into 8 Ohms or 2 x 200 Watts into 4 Ohms Class XD Amplification: Designed to eliminate crossover distortion at low signal levels Volume Control: New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance Tone Controls: Bass & Treble controls to alter the brightness and warmth of sound. Can be a single tone control or seperate controls Power Transformer: Audiophile grade oversize toroidal transformer and substantial extruded heatsink Separate Transformer: Taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers. There is also a separate toroidal transformer to supply the preamp making the 851A effectively a Pre and Power amp combination in one box Protection: CAP5 protection technology for trouble free operation Frequency Response: 10Hz - 50kHz S/N Ratio: >93dB Chassis: All-metal chassis with aluminum front panel to minimise vibration-induced distortion Front Display: Customisable front panel display Inputs: Balanced (2) and unbalanced (8) analogue audio (RCA) inputs Record Output: Yes Phono Input: No. Add a phono preamp and use a set of the analogue audio (RCA) inputs Speakers A+B: Yes Speaker Terminals: Binding posts accept bare wire or banana plugs (recommended) Subwoofer Output: No. You could use the pre-amp outputs or the record out jacks Headphone Socket: Yes, full size Infrared Control Input: Control bus in/out, and 12-Volt DC trigger in/out for integration with external control systems and components Power Cord: Basic IEC power cable that can be easily upgraded Auto-Standby Mode: Detects incoming audio signals for easy integration Power Consumption: 800 Watts Standby Power Consumption: <0.5 Watt Remote Control: System type remote control included Dimensions (WxHxD): 430 x 115 x 385mm - allow approx 100mm for cables Nett Weight: 15.0kg Finish: Available in black
  8. We have Gryphon Antileon Signature for sale
  9. We have Devialet Expert 220Pro Trade In $7900
  10. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 The Integrated Amplifier which adopted the current feedback magnification circuit as the power amplifier part. The current feedback type magnification circuit which returns an output signal in the form of current is adopted as a magnification circuit. A principle lowers the impedance of the input terminal by the side of a return, detects current, and carries out I-V conversion of the current with a transformer impedance amplifier, and it has the structure of making an output signal, and since the impedance of a return input portion is very low, it is difficult to generate phase rotation. Thereby, in order that there may almost be no necessity for phase compensation, it excelled in dynamic characteristics, such as a standup, and the natural energy response is realized. Moreover, high power has been obtained by it being parallel for an output element and adopting the power transistor for audios excellent in many characteristics, such as a frequency response, a current gain linearity, and switching, as it. The large-sized power transformer of the large power capacity of about 500 VA(s) and the mass filter condenser of 22,000 micro Fx2 are carried in the power-source part. Specifications Form Integrated stereo Integrated Amplifier Rated continuation average output 4ohm load: 140 W/ch (Both channel simultaneous operation, 20Hz - 20kHz) 6ohm load: 120 W/ch   8ohm load: 100 W/ch THD (both channel simultaneous operation) 0.04% (4-16-ohm load) IM distortion 0.01% Frequency response Main/High Level Input: 20Hz-20000Hz+0 -0.2dB (at the time of a rated continuation average output) Low Level Input: 20Hz-20000Hz+0.2 -0.5dB Dumping factor 120 (8-ohm load, 50Hz) The disc maximum input MM input: 250mVrms (Rec Out) (1kHz, 0.005% of distortion) MC input: 7.0mVrms (Rec Out) Input sensitivity/input impedance   Input sensitivity Impedance At the time of an Output power EIA (at the time of 1W output) AD Input(MC): 0.11mV 0.01mV 100ohms AD Input(MM): 3.9mV 0.39mV 47kohm High Level Input: 113mV 11.3mV 20kohm Balanced Input: 113mV 11.3mV 40kohm Main Amp Input: 1.11V 112mV 20kohm An Output voltage/Output load impedance Pre Output: 1.11V/50 ohm (at the time of a rated continuation average output) Tape Rec Output: 110mV/200 ohms (AD) Gain Main Input -> Output: 28dB High Level Input -> Pre Output: 20dB AD Input (MM) -> Tape Rec Output: 29dB AD Input (MC) -> Tape Rec Output: 60dB S/N, input conversion noise   Input short-circuit and A-compensation EIA S/N At the time of a rated input S/N Input conversion noise Main Input: 124dB -121dBV 102dB High Level Input: 110dB -128dBV 83dB Balanced Input: 90dB -108dBV 82dB AD Input(MM): 85dB -132dBV 80dB AD Input(MC): 70dB -146dBV 78dB Loudness Compensation + 6dB (200Hz, Volume-30dB) Subsonic Filter 25Hz, -12 dB/oct Power meter Logarithm compression type peak level display dB scale and the output Direct reading at the time of 8-ohm load Load impedance 4-16ohm Stereo headphone Conformity impedance: 4ohms - 100ohms Power source AC100V, 50Hz/60Hz Power consumption At the time of no inputting: 50W Electrical Appliance and Material Control Law: 290W At the time of an 8ohm load Output power: 390W Dimensions Width 475x height 170x depth of 418mm Weight 20.2kg Attachment: Remote commander RC-14 Remote control system Infrared pulse system Power source DC 3V Battery Two AA (SUM-3/R6) The maximum Dimensions Width 45x height 136x depth of 18mm Weight 85g (Battery includeds)
  11. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 McIntosh, the Rolls Royce of amplifiers. This brand brings you the finest manufacturer quality, stunning looks and ear drum blowing performance! The C2300 Vacuum Tube Preamplifier is the long-awaited replacement to the C-2200 valve pre-amp. It combines a suite of potent engineering enhancements with smart, user-programmable features to deliver a truly extraordinary audio preamplifier. Each input may have the bass, treble, and mono/stereo mode adjusted and stored in memory. When individual inputs are selected, these settings will engage as preset by the listener. All adjustments may be made either from the front panel or remote control. Two 12AX7a Vacuum Tubes are used for each of three sections: the Moving Magnet phono section, the Moving Coil section, and the high-level preamp section. Its phono sections are fully adjustable on the fly, so the listener may change impedance or loading settings as the record plays. A high performance headphone amplifier with a 1/4" headphone jack is included. Features Six Vacuum Tube Design Variable Rate Volume with Multi-Stage Precision Digitally Controlled Attenuator Vacuum Tube Moving Coil and Moving Magnet Phono Preamplifiers Custom Top Cover with Lighted Tube View Custom R-Core Power Transformer IR Remote Control Low Impedance Headphone Amplifier with 1/4” Jack Pass-Thru Integration Specifications FREQUENCY RESPONSE +0, -0.50dB from 20Hz to 20kHz +0, -1dB from 10Hz to 100kHz RATED OUTPUT Balanced: 5VRMS at MAIN, 1 and 2 Unbalanced: 2.5VRMS at MAIN, 1 and 2 OUTPUT IMPEDANCE 250 Ohms MAXIMUM VOLTAGE OUTPUT Balanced: 16VRMS at MAIN, 1 and 2 Unbalanced: 8VRMS at MAIN, 1 and 2 TOTAL HARMONIC DISTORTION 0.08% maximum from 20Hz to 20kHz SENSITIVITY Phono, MC: 0.45mV for 2.5V Phono, MM: 4.5mV for 2.5V High Level: 450mV for 2.5V SIGNAL-TO-NOISE RATIO (A-Rated) Phono: 80dB High Level: 93dB MAXIMUM INPUT SIGNAL Phono, MC: 5mVPhono, MM: 50mV High Level: 5V Balanced INPUT IMPEDANCE Phono: MC: 25, 50, 100, 200, 500, or 1000 Ohms MM: 47k Ohms, 50 to 750pF, 50pF steps High Level: Balanced: 40k Ohms Unbalanced: 20k Ohms VOLTAGE GAIN Phono, Moving Coil to Record Output: 60dB Phono, Moving Magnet to Record Output: 40dB High Level to Record Output: 0dB High Level to Main Output: 15dB OVERALL DIMENSIONS (H x W x D) 7-1/8” (18.1 cm) x 17-1/2” (44.4 cm) x 14-1/2” (36.8 cm) including clearance for connectors. Knob clearance in front of the mounting panel is ¾” (1.9 cm) WEIGHT 29.5 lbs. (13.41 kg) net 44.9 lbs. (20.41 kg) in shipping carton
  12. Further information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 Specifications Woofer: 11’’ Accuton, ceramic sandwich dome Series XA size Midwoofer: 7’’ Accuton, ceramic membrane Tweeter: 1,2’’ Accuton, Diamond inverted dome Internal Wiring: Kubala-Sosna Capacitors: Mii, Teflon-Hybrid Inductors: Goertz, copper foil – Air Core Frequency Response: 22 – 45 000 Hz Power Rating: 200 W Nominal Impedance: 6 ohms (min 3,8 ohms at 70 Hz) Sensitivity: 88 dB/2,83 V Minimal Amplifier Power: 20 W Dimensions Height: 1370 mm Width: 450 mm Depth: 640 mm Net Weight: 86 kg per piece
  13. It doesn't come with original box or manual We will ship it with other box on a pallet.
×
×
  • Create New...
To Top