All Ads

VPI HW-17 record cleaner.  Very good condition and everything functioning as it should.  The cosmetic condition is also very good and it comes with manual, spare vacuum wand, and power cable.
Does a very good job of cleaning LPs and the reverve rotation function helps to provide a more thorough clean combined with the powerfull vacuum.

Retailed when new for approximately $1800US.

Some of the key features of the VPI HW-17 are as follows:

-Self-contained powerful liquid pump.
-Stainless steel holding and catch basins.
-Applies liquid and scrubs record at the same time.
-Light touch pushbutton controls.
-Self adjusting velvet coated vacuum nozzle for quick deep cleaning.
-1 BRPM high torque turntable motor allows you to apply special cleaners and preservatives easily.
-Works from top of record so you can see what you're doing.
-Scrubs record in forward and reverse mode for deeper, more thorough cleaning.
 
Shipping is included at my asking price.

Further from the internet:

With the HW-17 record cleaning machine and its unprecedented cleaning power, your album collection will sound better than it ever has before. With proper cleaning, your records will last longer, and it will reduce wear to your expensive needle. A record that may appear perfectly clean to the eye can contain a buildup of debris deep in the grooves. Even a brand new record contains debris from the manufacturing process which will be removed by the HW-17.  The fan cooled HW-17 is built for hours of continuous use and is ideal for large record collections.  With its high-torque, 18 RPM turntable motor and its high-power vacuum.  The HW-17 features automatic cleaning fluid application, a self-aligning vacuum suction tube for accurate cleaning, and the HW-17's high-power vacuum ensures quick, deep cleaning.  It also features a bi-directional motor, which will allow albums to be cleaned in both directions, so debris that is unable to be removed from cleaning in one direction, can be removed by cleaning in the other direction. The HW-17 features a marine grade plywood chassis for long life and durability.

Amazing pair of as new Ml 2.1 mono block amps from Lamm. Plenty of tubes main set and quite a few spares. Original Lamm crates for transport.

Pick up or can ship worldwide.

ML2.1 is the direct replacement of the ML2 — the first in a line of LAMM single-ended amplifiers with a regulated power supply that represented a new generation of power amplifiers employing unique high current low impedance power vacuum tube triodes (6C33C) in both the output stage and voltage regulator. Implementation of these triodes has allowed to create an output transformer with a very low turns ratio and, as a consequence, extended (as compared even to the most advanced modern vacuum tube amplifiers) frequency decade factor, as well as dramatically reduced leakage inductance.
The ML2.1 features the following upgrades and modifications as compared to the ML2:
addition of a more user-friendly mains fuse holder.
power transformer upgraded to accommodate the 230V mains operation (in addition to the already existing 100/120/220/240V in the ML2)
modified output transformer
addition of two handles on the rear to make it easier to handle the amps and protect the rear panel connectors during transportation
 
heavy-duty speaker binding posts
 
utilization of a much higher quality pc-board, and parts and materials that have become available in recent years
Chosen by the Design and Engineering Committee as one of the most innovative products of the year in the “specialty audio” category, the ML2 was a first single-ended amplifier on the market capable of reproducing a full range of audio frequencies and recreating the original spectral balance and harmonic structure of the recorded material with almost 100% accuracy. Another unique aspect of the design enables the ML2.1 to recreate a three-dimensional soundstage without boundaries and limitations while maintaining the extraordinary transparency of perceived sound.
A custom-designed output transformer, along with a unique output stage and high-current regulated power supply, allow the ML2.1 to drive most of the real world speakers and yield tremendous sonic stability under most dynamic conditions. Although the ML2.1s can drive most speakers, their full potential is realized in tandem with high efficiency speakers (94 dB and higher).
Two multi-turn trimming potentiometers accessible through special openings in the amplifier’s chassis, along with two sets of test points, allow the user to adjust and measure the nominal value of plate voltage and plate current of the output tube by using an external voltmeter.
In conceiving and executing an overall design of the ML2, the goal was to utilize the modern technology and processes while recreating a look reminiscent of the long-gone genuine vacuum tube era. Each amplifier is carefully constructed and handcrafted of the finest materials and world class parts, some of which include military graded low noise DALE metal film resistors; ELECTROCUBE and ROEDERSTEIN film capacitors; high frequency switching grade CORNELL DUBILIER and UNITED CHEMI-CON electrolytic capacitors; HAMMOND chokes; gold-plated NEUTRIC XLR connectors; and military graded low noise long life vacuum tubes. Special attention was given to designing the toroidal power transformer, which has no mechanical contact with either the transformer cover or the chassis, and is suspended in a special encapsulant which almost completely absorbs even the residual mechanical vibrations. This plays a significant role in assuring the absolutely unique clarity and micro-resolution during sound reproduction.
The ML2.1 works on all world AC line voltages.
U.S. Patent pending.

Incredibly rare JBL 9800 SE floorstanding , 4sets in the entire world.
 
Extra Info: JBL made 4 pairs of these in gloss black as special demo speakers, this is one of those pairs!  There are only 3 other sets in the world!
They are the Special Edition models, in fantastic condition, lightly used, always with the best amps etc driving them (Goldmund..Vitus Gryphon and Concert Fidelity)
These are amazing speakers. 
I bought from David but cannot utilise currently which is a shame I have borrowed some of Daves images  to sell. .
One speaker is almost immaculate , one small nick and the other has some mild swirling polishing marks on top .and hard to see but there and has a couple of small nicks on edges of base. 
 
JBL K2 S9800 Loudspeakers

 
What’s the greatest speaker in the world? It’s a question that defies a rational answer, because the top speakers all have their own individual sonic flavor, and personal taste plays a part. But one that would be sitting at the top of my particular short list right now is this JBL, christened the K2 S9800. 
 
The JBL K2 S9800 is a flagship model from one of the largest and best-known speaker brands in the world. JBL is one of America’s finest; its original Californian roots go right back to the 1930s, though it now operates under the Harman International banner, with equal success in both the professional and domestic audio arenas.
 
However, JBL’s strongest reputation as an audiophile brand is in Japan, which has enormous respect for hi-fi heritage and tradition. This particular loudspeaker is the latest in a succession of models that have been specifically developed with the Japanese market in mind, drawing on a combination of the company’s heritage and its latest technologies. Indeed, although JBL introduced the K2 into Europe in mid 2002, long after its Japanese debut, the company decided only very recently to launch this made-in-the-USA model in its home market.
 
That’s largely, I suspect, because its shape and configuration are deeply unfashionable in today’s context. In a sense it’s an updated, floorstanding variation on the theme set by the highly successful 4320 Studio Monitor and its domestic L300 derivation in the 1960s and 1970s. Hi-fi archaeologists will be able to track its roots still further back to a speaker called the Iconic, which used a similar driver configuration and was first made by a company called Lansing Manufacturing in 1937.
 
Inside and outside the box
Choice of drive units does much to determine this speaker’s size and shape, and since this model uses a 15-incher for bass and much of the midrange, it is wide, tall, and unavoidably intrusive. This is essentially a giant two-way, although an additional supertweeter comes in above 10kHz for the final less-than-an-octave-plus ultrasonics.
 
 
None of these drive units is anything like conventional. The port-loaded 15-incher operates all the way up to 800Hz (which is more than half the audible bandwidth). It uses a traditional paper-pulp cone, a foam surround, and an Alnico (aluminium/nickel/cobalt alloy) magnet. The materials used might sound somewhat nostalgic, but the actual motor design is very advanced, using a "short-coil/long-gap" approach, with a laminated copper/steel outer gap sleeve.
 
 
A special horn driver then takes over for the three-and-a-half octaves from 800Hz up to 10kHz. This has 90 x 50-degree flares, with a 3" 435Be beryllium-dome compression driver. Sitting on the top is a type 045Be compression-type supertweeter, with a 1" beryllium diaphragm loaded by a 30 x 60-degree horn. Originally developed for JBL Pro systems, beryllium is incredibly costly because it is very rare and an exceptionally difficult metal to work. It also has an extremely high stiffness-to-density ratio (much higher than aluminium or titanium), so it is ideal for tweeter diaphragms.
 
 
Reflex-loaded by two large ports in the rear, the large enclosure is irregularly shaped and built from a mixture of 25mm MDF and Sonoglass resin. It is finished to a very high standard in a classy if rather gloomy high-gloss dark charcoal gray with black highlights. A light-gray option is also available. Floor spikes are supplied, along with coasters to protect a wooden floor, but no locknuts. Although the fore-and-aft footprint is relatively modest, the hefty total weight of almost 200 pounds ensures decent mechanical stability
Mounted in its own sub-enclosure to avoid acoustic vibration, the crossover network is particularly intriguing. It uses high-power air-cored inductors, and uniquely (very cleverly) pre-biased twinned capacitors (by means of a 9V PP9 battery), which improve linearity and help avoid crossover distortion. Two presets allow very subtle adjustment to the bass damping and relative treble level. Two pairs of terminals provide biwire or biamp options, while a switch bypasses the bass-to-horn network to permit full active drive.
 
 
My in-room measurements were very promising indeed. Placed well clear of walls, the K2 delivered unusually smooth and flat far-field traces, with a close-to-ideal, gently down-tilted overall characteristic. There is a little too much output around 500Hz, and some unevenness above 7kHz, but the result is very impressive overall, helped because the main horn, running 800Hz to 10kHz here, avoids the usual 2kHz-to-4kHz presence-zone discontinuity.
 
Sensitivity registered a very generous 93dB. The speaker is also a very easy amplifier load, with an impedance that never falls below 6 ohms. This K2 S9800 is well suited to lower-power valve amps, as well as regular solid-state models that can take full advantage of its 400W power-handling capacity.
 
In the listening room
So much for the basic description; what about the sound? First impressions were exceptionally positive, and I don’t think I have ever encountered a speaker that has quite so many good things going for it. Neutrality is exceptionally good, which is an excellent starting point, but this speaker does nearly everything else exceptionally well, too. 
 
 
Dynamic range is magnificent. The speaker goes as loud as your mood (and your amplifier) takes you, yet above all shows wonderful delicacy of detailing even with the quietest of sounds. Realistically resolving the fine texture of massed orchestral strings is really difficult, but is something that the K2 simply takes in stride. It also possesses seemingly inexhaustible headroom, with a complete freedom from strain at all normal levels -- though it can get a little aggressive with some material when driven hard.
 
The bass manages to sound full, rich, and warm, without becoming in any way overbearing, and also seems beautifully agile and free from overhang. It doesn’t perhaps have quite the punch and drive that’s available elsewhere, but does manage to sound exceptionally natural at all times, which is arguably more important. The simple fact that it doesn’t draw undue attention to itself must be seen as a plus.
The K2's best trick has got to be the way it handles microdynamics -- tiny low-level details that provide clues to the size of a choir or an auditorium, and make audience applause sound creepily realistic -- even when operating at very low levels. Orchestral music in particular has a subtlety and realism that’s totally beguiling, while opera also combines great authority with fine voice articulation.
I found myself spending much more time than usual listening to BBC Radio 3, the UK’s excellent network classical music radio station. I’ve even started getting into Shostakovich for the first time, via a splendid (and cheap!) new recording of the 11th Symphony by the LSO under the baton of Msitislav Rostropovich on the LSO Live label [LSO 0030]. 
 
Popular music is equally well served by the JBLs, especially the acoustic live recordings, which include some of my favorites. Christy Moore’s At the Point: Live [GRACD 203] is a longstanding favorite from 1994, and the K2s were most effective at bringing out the humor of the performance, and the polished stagecraft of this very experienced performer. 
More recently I’ve been exploring the double Live CD from Alison Krauss + Union Station [Rounder RRCD 610515], another exceptionally high-quality recording from this fine "modern country" band. The K2s highlight the superb musicianship and bring out the delicate dynamic layering of the often complex arrangements very well.
 
Through the window
Horn speakers are not to everyone’s taste, and while a number of visitors agreed that this speaker seems remarkably free from the vices normally attributed to the breed, some listeners might find it a little too ruthlessly revealing, preferring something rather more laid-back and restrained. While the K2 does have some aggressive tendencies when worked hard, taking no prisoners among poor-quality software, sources, or amps, its ability to "suck in" the listener and create involvement in even unfamiliar material is unparalleled in my experience.
 
 
One aspect of performance that’s somewhat different from the norm lies in the way this speaker interacts -- or rather doesn’t interact -- with the listening room. Most speakers have relatively wide dispersion in every direction, so that although the sound you hear is dominated by the direct sound from speaker to listener, it is richly augmented by room-reflected sound. However, both the K2’s large bass/mid driver and its mid/treble horns seem to have comparatively narrow dispersion through the midrange and treble, so there’s less room sound than is usually the case. 
In that respect the K2 shows certain similarities to dipole panel loudspeakers such as the Quad ESL-988, which have a figure-eight-shaped distribution. This means that you hear more of the direct sound coming straight to you from the loudspeakers, and proportionally less sound reflected from the walls, floor, and ceiling than you would using a speaker with a much wider dispersion characteristic, such as the B&W Nautilus models. 
 
 
Whereas the Nautilus 800 will tend to fill the room more, creating a strong impression that the musicians are actually sitting right there, the K2 and Quad provide more of an "open window" onto the recording sessions, revealing more of what the recording engineer intended, but less of the illusion that musicians are actually playing in front of you. This is neither praise nor criticism, as there’s neither right nor wrong here, but it is a relevant observation that has a significant impact upon the character of the listening experience.
 
 
This quality undoubtedly contributes to the very precise imaging, alongside this bulky speaker’s surprisingly good transparency. It’s not quite a match for the best dipole panels here, but is rather better than most box loudspeakers in this regard. 
In the end
Some months down the road from its arrival, my respect for this remarkable speaker system continues to grow. It suits my brick-built 14’ x 8.5’ x 18’ suspended-floor/ceiling listening room exceptionally well, and has been getting me into all sorts of interesting new music. It’s essentially neutral, transparent, and dynamically realistic, all of which proves very revealing of the components to which it’s connected. For most of the time I’ve been using my regular Naim electronics, but the K2 clearly and unequivocally reveals the effects of changing components further up the chain, whether the actual electronics or accessories such as cabling. 
There’s no such thing as the perfect speaker, because there are always design choices and performance compromises to be made. The K2 S9800 might seem like a faintly bizarre and unfashionable throwback in a modern-marketplace context, but there’s some comfort in knowing the illustrious history that is on its side. This is very much the ultimate two-way, with all the advantages of simplicity which that implies, brought bang-up-to-date with a supertweeter and the latest driver technologies.
 
 

Supratek grange signature with an excellent phono stage in black and chrome made in march “23”.
The remote isn’t working as I think it’s the sensor but haven’t had fixed due to distance from repairers.
Have original box so postage at buyers cost.
Tubes used
6J5 / E180F / 6E6P on the head unit
Power supply
6L6GC / 5AR4
As there is only 6 of these out in the wild
The RRP is $5000 USD.

Accuphase DC-901 Precision MDSD Digital Processor. This is the DAC half of their top of the range 2 box SACD/CD player. Retail for the current model DC-1000 (which is almost identical to this) is $32,500. Sounds absolutely superb with incredible depth of resolution in the usual non-fatiguing Accuphase way and is in excellent condition with barely a mark on it. Prefer local pickup as this is heavy at nearly 24kg, but can ship double boxed with pack and send at buyers expense.

Sale is for three (3) speakers

Only 250pcs made worldwide.

I purchased these speakers from the forum around 4 years ago and fair to say they exceeded my expectations. They fit perfectly into my room and by the time I replaced them I had many great experiences with them. I doubt you could find better value in the market for some kick ass Home theatre speakers, the THX ULTRA specification really does mean something with these, they perform at a very high level.

I'll start off by saying these are not "bright" speakers, they put out exactly what is put in and along with Dirac and my two Rel subwoofers they sounded amazing to my ears, I've only replaced them because I am leaning back towards 2ch stereo music now so needed more of a hybrid speaker to swing between HT and Music. That said 5.1 surround sound and concerts sounded bloody impressive with these!

If you have a room that can accommodate them you will be very happy with these sitting up front, once you've had matching LCR speakers there really is no turning back, the sound field goes to a new level completely. Unfortunately I can't demo, they are no longer connected to my system.

OVERALL CONDITION
Speakers and grills in overall great condition, there is some scuffing here and there but as you can see in the photos they present well, they spent most of their time with me housed in a baffle wall.

SPEAKER REPAIR
About 3.5 years ago I had an accidental volume spike with two of the speakers, I took the speakers to Queensland Speaker Repairs and he tested them thoroughly. All tweeters and woofers were tested. The tweeters were found to be fine, but he found that on one of the woofers the voice coil was deformed, so he replaced it. You can see there is a small amount of glue residue on the repaired speaker. I had full intention to replace the woofer with a genuine M&K Woofer if I could hear anything, but I never could so I didn't. The replacement cost at the time was $395.00.
As you can see by my price, this has been factored into the asking price.

BI-WIRE CABLES
These have been upgrade by the previous owner with ATLAS plugs and sliver wire, note that one of the plastic surrounds was missing when I took ownership.

SHIPPING
I have the boxes that the speakers came to me from Victoria in, original foam inserts but not original boxes. If you are interested in shipping touch base and will confirm sizes and weights. Responsibility of the shipment will be with the buyer.

For sale is my beloved SR 009s Electrostatic Ear speakers/headphone. It's probably an end game headphone for many. 
 
The 009S is praised for its incredibly natural, clear, and spacious sound. It delivers an ultra-wide frequency range with great precision, minimal distortion, and an almost perfect reproduction of the original recording. The sound is detailed without ever feeling overly analytical. The midrange is especially well-regarded, offering an organic, lifelike quality to vocals and instruments.
 
The SR-009S features a new headband design that makes it more comfortable for long listening sessions. It’s lightweight and well-balanced, with plush ear pads that help reduce fatigue. I can easily wear hours.
 
I'm also selling the matching Stax SRM-700s amp to get the most out of 009s at a very good price performance ratio. Feel free to message me for a combined package price.
 
Comes with complete packaging and Stax woodstand as well as original dust cover.  Very very good condition.
 
Reviews Below
 
https://audiophilestyle.com/ca/reviews/review-of-stax-sr-009s -an-endgame-in-2021-r1074/

Here is a USA built Aronov LS-906I, a dual mono preamplifier and power amplifier housed in the one chassis. I had came across an Aronov preamp and was so blown away by it that I went out of my way to find anything else by the brand. I had this paired with Tannoy Arden loudspeakers (now sold) and it was incredible. The Power Amp section takes 6550 tubes and the preamp section takes AX7/ECC83. This amp has detail, authority and powerful clear bass and it is certainly a compelling amplifier. In the 90's it retailed for 3K USD, equivalent of north of 9K AUD in today's money and the only other one for sale worldwide right now is going for 2,500 Euro, i.e. $4,840 AUD. Point being, for under 2K AUD I doubt you could even come close to the performance this amp offers.
OUTPUT IMPEDANCE:   8 OHMS.
POWER OUTPUT:   60 rms watts per channel.
FREQUENCY RANGE:   20 hz to 20,000 hz.
HARMONIC DISTORTION:   less than 0.5%.
INPUTS IMPEDANCE:   TUNER I CD I AUX I TAPE 47KOHMS.
INPUTS SENSITIVITY:   TUNER /CD / AUX/TAPE 250 mV.
NOISE AND HUM:   90 db below rated output.
POWER REQUIREMENTS:** 110 / 117 / 220 / 240 V 50/60 HZ
MECHANICAL INFORMATION: 
Dimensions : 457 x 210 x 353 mm
Weight : 26 kg
 
The LS-960I utilizes high-quality switches and controls, and all inputs feature gold-plated RCA connectors. The preamplifier section features a DC power supply for the tubes, while output power is provided by 6550 Class AB tubes.
 
NB: This was serviced before I bought it and runs beautifully, unfortunately when re-fitting a selector switch it was over tightened and made a single crack in the glass in bottom right corner. It’s been haphazardly taped up but it never bothered me so I never interfered with it. 

Product Details
Brand: Classé
Model: Delta Stereo
Serial Number: 2300786
Condition Notes
This Classé Delta Stereo power amplifier is in fantastic condition with very light wear, representing exceptional value for audiophiles seeking reference-grade amplification.
The Delta Stereo combines Classé's legendary engineering expertise with compact design, delivering pure Class A operation for the first 12.5W per channel and commanding 250W total power per channel. Hand-laid 6-layer circuit boards and premium Mundorf capacitors ensure pristine signal integrity, while custom illuminated VU metres provide elegant visual feedback of your system's performance.
Perfect for Australian audio enthusiasts who demand uncompromising stereo amplification without the space requirements of dual mono configurations, this amplifier drives any loudspeaker with complete confidence and delivers the natural, expansive soundstage that defines the Classé experience.
Main Specifications
Class A Power Output: Up to 12.5W per channel
Total Power Output: 250W per channel (350W per channel at 2Ω)
Circuit Board Construction: Hand-laid 6-layer boards
Capacitors: 22 x 4-pole Mundorf premium capacitors
Power Supply: Massive high-quality design with custom toroidal transformer
Connectors: Furutech rhodium-plated RCA inputs and torque-guard speaker terminals
Vibration Control: Custom-made Navcom feet
Display: Dual illuminated VU metres

Product Details
Brand: McIntosh
Model: MC303
Serial Number: ADC1587
2 Units Available - Reach Out If Interested In Both
Condition Notes
This McIntosh MC303 power amplifier is in excellent condition and has been very well looked after by its previous owner. It represents outstanding value for Australian audiophiles seeking premium multi-channel amplification.
The MC303 delivers an impressive 300 watts per channel across three channels, utilising McIntosh's renowned Autoformer technology for optimal performance with 2, 4, or 8-ohm speakers. Perfect for driving front left, right, and centre channels in home theatre setups, or for tri-amping compatible speakers in high-end music systems.
Built with McIntosh's signature Power Guard and Sentry Monitor protection circuits, this amplifier ensures reliable operation while protecting both the unit and your speakers. The classic stainless steel chassis and black glass front panel exemplify McIntosh's timeless aesthetic appeal.
Main Specifications
Power Output: 300 Watts x
Speaker Impedance: 2, 4, or 8 ohms
Tri-amp Capability: Yes
Protection: Power Guard and Sentry Monitor
Inputs: Balanced and unbalanced
Meters: Triple bank blue watt meters (switchable)
Chassis: Polished stainless steel
Front Panel: Black glass with custom aluminium handles
RRP: $31,995 AUD (inc. GST)
Condition: Excellent

Actually have 2 of these available, can provide photos of the second unit as well.
Product Details
Brand: Marantz
Model: MM8077
Serial Number: AAN2719070752
Condition Notes
This Marantz MM8077 arrives in excellent condition, having been well maintained by its previous owner. The unit shows minimal signs of use and performs to full specifications.
Engineered for serious audiophiles, this power amplifier delivers 150W per channel into 8 ohms with Marantz's signature current feedback discrete amplifier design. The high current power supply with toroidal transformer ensures exceptional dynamics, while the copper-plated chassis and reference-grade components provide long-term reliability for Australian home theatre enthusiasts.
Perfect for driving demanding speaker systems, this amplifier offers both balanced XLR and unbalanced RCA inputs for maximum flexibility. The gold-plated terminals and discrete power transistors handle complex musical passages and low impedance loads with precision.
Main Specifications
Power Output: 7 x 150W (8 ohm), 7 x 180W (6 ohm) RMS
Frequency Response: 20Hz-20kHz
Amplifier Design: Current feedback discrete power amplifier
Power Supply: High current with toroidal transformer
Chassis: Copper plated construction
Speaker Terminals: Gold plated, high grade
Inputs: Balanced XLR and unbalanced RCA per channel
Control: DC trigger in/out, remote control in/out
Finish: Black

Product Details
Brand: Classé
Model: Delta PRE
Serial Number: 2350921
Condition Notes
This Classé Delta PRE preamplifier is in mint condition and has never been used by the customer. It presents as new with no signs of wear or handling marks.
The Delta PRE represents Classé's commitment to high-end audio engineering, delivering exceptional sound reproduction and premium build quality. This preamplifier offers the refined performance Australian audiophiles demand for their reference systems.
As a trade-in unit in perfect condition, this represents an excellent opportunity to own premium Classé engineering at significant savings compared to retail pricing.
Main Specifications
Brand: Classé
Model: Delta PRE
Product Type: Preamplifier
Condition: Mint (never used)
Original RRP: $17,900 AUD

Can arrange upgrade board to bring it up to mk2 at an additional cost.

Purchased new by me on 23/02/22 from Audio Connection. Good entry level cable but not used for a long time since I sold my Hegel.

Purchased new by me on 11/07/22 from Aurealis cables. Decent quality cable that I used with my Lumin T3 (before I sold that).

Delivery is fine and included (standard only).

These came with my old VPI Classic 1 that I bought new from Krispy Audio in 2014. They are the standard feet but I replaced them with the HRX feet. I think the things in the forefront of the photos are isolators of some kind but they are not required to use the feet.

In excellent condition.

Purchased quite some time ago from Audio Connection as spares.

Martin Logan speaker feet that used to be used on there speakers from more than a decade ago or so.

Used three of these on a home made turntable plinth and they work really well.

Adjustable height. I believe the screw thread is 6mm.

Heimdall II + Tonearm cable 1.25 mtrs. Mint condition, plugged in for about 1.5 years if that. Used on my old VPI turntables when I owned them.

Purchased new by me 23/02/22 from Audio Connection. This is a stunning tonearm cable with so much detail and resolution - I wish my Clearaudio tonearms used this cable.

Pick up or delivery with insurance (this will be extra).

For sale here latest iteration of TAD evolution series power amp M1000TX with its preamp C1000. I have full TAD evolution system and it has been best combination I had in my room, but I like to try new things and need funds.

New system will be change of direction because I believe that I have reached the best I can on my room with the TAD electronics and speaker.

CE1TX speaker also for sale.

TAD LABORATORIES
TAD EVOLUTION PREAMPLIFIER　-　TAD-C1000 — TAD LABORATORIES

TAD LABORATORIES
TAD EVOLUTION Power Amplifier　-　TAD-M1000TX — TAD LABORAT...
https://pt.audio/2024/03/17/tad-c1000-preamplifier-friends-review/

https://www.enjoythemusic.com/superioraudio/equipment/0724/TAD_Evolution_C1000_Preamplifier_M1000_Power_Amplifier_Review.htm

Items were purchased new from australian distributor. I have all the boxes for safe shipping.

Here are for sale last piece of my TAD set up, the CE1-TX speaker. Here below link to different review.
All items have been purchased new directly from the distributor.
I have all boxes for safe shipping.
If you are in Perth, happy to demonstrate the system.

Note: westminster lab jumper and andante largo spike cups are not part of the sale.

https://www.soundstageultra.com/index.php/equipment-menu/1214-tad-compact-evolution-one-tx-loudspeaker

https://www.alpha-audio.net/review/review-tad-ce1tx-monitor-off-the-scale-2/

https://www.stereophile.com/content/tad-ce1tx-loudspeaker-page-2

HomeTheaterHifi.com
TAD-CE1TX-K Stand-Mount Speaker Review - HomeTheaterHifi.com
I had the distinct pleasure of reviewing the previous generation TAD Compact Evolution One (CE1) and came away exceedingly impressed.

Mint condition large centre speaker of the Platinum Flagship range. https://monitoraudiogroup.dash.app/browse/all/386db4a5-2db4-4090-a065-71ab1696924d?portal=monitor-audio-public-resources

PLC350
PLC350 is a substantial three–way, four driver centre channel speaker with the same driver
complement as the PL300. Armed with drivers and Platinum series technologies of such
potency, the PLC350 is able to reproduce frequencies from 32Hz to 100 kHz - arguably the
widest bandwidth of any centre speaker available. The range virtues of an utterly neutral
tonal balance and low distortion and cabinet colouration make the PLC350 perfect for
reproducing crystal clear dialogue. Given that at least sixty per cent of the information
generated by a home theatre system is reproduced by the centre-channel speaker, the
value of having as accomplished a design as the PLC350 in the role cannot be overstated.
For a seamless transition of audio within the front soundstage of a Platinum home theatre
system, the PLC350’s tonal character and performance matches perfectly that of the
PL300, to generate a truly immersive, dynamic and enriching multi-channel experience.
The PLC350 comes with a pressed, open mesh grille. This is invisibly held in place by high
strength neodymium magnets embedded within the ARC baffle to give a clean finish to
the front. Weight 33.5kg!

System Format: 3-Way, 4-Driver Center Channel
Frequency Response: 32 Hz - 100 kHz
Sensitivity (1W@1M): 90 dB (or 91dB/2.83V/m based on measurements)
Nominal Impedance: 4 Ohms (Minimum 6.2 Ohms @ 100Hz)
Maximum S.P.L (Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements: 100 - 250 W
Bass Alignment: Twin Ported HiVe®II Technology
Mid-range Alignment: Sealed Mid-range TLE®
Drive Unit Complement:
2 x 8" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high-frequency ribbon transducer
Dimensions (Excluding Stand) (H x W x D): 288 x 800 x 368 mm
No stand.

IMO these interconnects the best pure silver interconnects under a $1k. They are smooth, transparent and simply just lets your equipment sing. I have been running my system with an entire loom of Robertson Audio cables, and they are a big step up from the Diamond, Ruby and Sapphire range. Selling as I have upgraded.

The Elite range of cables have been reviewed by an independent source & blind tested against other cables in the 5K-10K price range, the results equalled or or in some cases surpassed tonal properties & excellence.
See the full detailed review here: https://robertsonaudiocables.com.au/pages/elite-range-teflon-shielded-naked-rca-xlr-interconnect-review-by-shane-stephenson
Polished ULTRA PURE 99.99% Silver Conductors  Specially heat treated for the ultimate in sonic clarity and accuracy
Spiral braided copper shielding to reject Radio Frequency Interference (RFI) & EMI
Teflon insulators - using air gap technique
Mylar Foil spiral wrapped resulting in overlapping to ensure minimum 130% coverage for additional shielding
New low noise audiophile quality carbon fibre RCA plugs with Rhodium plated hollow copper pins
Attractive matching silver carbon fibre directional sleeves

Well known and regarded Meridian 565 preamp/processor available. Great addition to any surround sound system. Accepts one analogue input for internal ADA conversions/upscaling or not (HS = Y or N). Can be used as stereo DAC too. Can convert stereo input to 3 or 5 channel output (with or without sub by setting Type). Can also be used as source for speakers that accept digital input (by changing Type to Digital instead of Analogue output). Pairs with other Meridian 500 series units via C5 comms cable(s).

Cosmetically very good. Missing one of the four original small rubber feet but this is easily replaceable.

Does not come with remote but these are readily available on eBay (smaller or full MSR types available).

Shipping available AUS-wide available via courier at buyer’s expense (approx $40-60 depending on location).

Open to reasonable offers.

Thanks for looking.

A fabulous famous high-end Class -A New Zealand Power Amplifier that sounds incredible and has the punch and power to boot and has run every speaker I’ve tested it with even the very hard to drive speakers.

Great condition and no damage or marks etc I could see, some of the font is rubbed off around the mute button (see photos)

Its in perfect working order and hand built by Plinius to last for many many years to come.

It is its highly biased in Class-A more than any other amp I’ve had so it does get hot in Class-A mode!
Not an amp to leave boxed in a rack etc, it needs room to breath to disburse the heat. It can also be run in Class-AB mode (button on the front) to drop all the Class-A heat at the cost of 10-15% SQ drop (well to me). It auto switches to Class-AB mode if you leave it running with no music running in Class-A by mistake.

Welcome to audition for serious buyers only. Would recommend pickup due to the weight (nearly 40KGs) and don't have the original box or packaging. I can do a shipping quote via Pack and Send if wanted.
Brisbane area drop-off also available.

More info and specs:
https://e-shop.highendstudios.de/plinius-sa103-power-amplifier.html?language=en

Any questions please ask.
Thanks.

One of the best tube rolling HP amps around, sadly don’t have the time to use it much anymore.

I’ve only powered it up twice over the last year and sold my main headphones so selling this one on for someone else to enjoy.

It can run a huge range of tubes and its auto-bias, so no need to set each time! It still has bias pin holes to read the bias if needed.

It can run two voltages ranges - Low (240V) and High (270V), so e.g 6L6 tubes all the way upto KT150 etc.

Also has a Triode and Ultra-Linear (UL) switch and has speaker outputs for high efficiency speakers. It outputs a max of 6 watts in Class A.

I already have 2 other McChanson amps and this is the easiest to set/use and the best for headphone use (even lower ohm ones).

Since I don’t have a need for all my single tubes now, I’m doing a bulk package as per photos. Some great tubes too! All were brought as NOS or near too, all should work but didn’t have the time to test them all.

Only comes with a single 6BW4 Rectifier and a couple of sets of power tubes as I’m keep my other tubes for my bigger amps. Comes with 6922 to 6SN7, 12AU7/12AX7 to 6SN7, 6CG7 to 12AU7/12AX7 and Dual 7193 to 6SN7 Adaptors. I am missing the 5755 to 12AU7/12AX7 Adaptor though but can be brought online for $15. Comes with socket savers for the amp too.

Eric is happy to help with what tubes to use etc and is a big following on Head-Fi with a master Excel of tube compatibility that gets updated (I can PM you the latest one).
I can also help and can send you all the info/notes from Eric on the amp too.

Postage AU wide will be likely around $50

Any questions please ask.
Thanks.

Don’t think these need an intro if you know Focal beryllium speakers, fantastic sounding Focal’s the best Focal sound to price performance to me after hearing many in the Focal range including low to their high range.

Great over all condition will all floor spikes and protectors etc like new. Relisting much lower as kids left my door open and sadly cat has nicked one of the low bass woofers. Its has been professionally fixed and sealed from behind with rubber/speaker glue (E6000), this can only been seen when up very close and doesn't affect the sound in anyway. New woofer can be found over time for $325 AUD or Focal rubber surround kits can be found online for $100 or less if it really bothers you, even cheaper for non-originals.

Also when I got them a slight mark on one of the front metal side that can be seen only on certain angles/light as per photo, not sure what from as was there when I brought them. Likely can be removed with correct cleaner.

Full Specs: http://www.newaudio.it/focal/1027be/1512.pdf

Pickup only due to weight 33kg each and happy to demo but only for serious buyers only.

No offers please as any lower id keep them with my collection as I've now relisted much lower than before due to the woofer.

Any questions please ask. Thanks.

Great working order and condition. Few very light marks/bumps looking close up.

Comes with 1.5M AudioQuest Forest USB Cable.

Was used with my PS Audio DAC with a lot better SQ results vs USB direct.

Postage AU wide around $25
 

More information:
The X-SPDIF 2 digital audio interface inherits the excellent quality of its previous generation.

The newly added IIS-LVDS interface can be connected with other DACs which supports IIS inputs, avoiding audio signal conversions. With the high-quality femtosecond clock and FPGA processing unit, X-SPDIF 2 supports up to 32Bit/768kHz PCM and 1Bit/DSD512 signal output.

Features:
- Powerful multi-core and multi-threaded processing capabilities
- FPGA Control Centre
- Audiophile Crystal Oscillators
- Multi-level, multi-group LDOs and solid capacitors
- Configurable IIS Port
- External Power Supply Supported
- CNC Aluminum Chassis

Lumin P1 network streamer, DAC, preamp

Excellent condition

Warranty 2 years

https://www.audiomagic.com.au/exdemo-products

0.6m Audioquest Cinnamon HDMI cable for sale. Used it mainly for I2S and in my opinion, it has a very natural sound compared to many other cables in its league.

Can’t go wrong with it.

Purchase about 3 months ago from the Audio Tailor.

It's an excellent unit and has enough power to drive most things.
I have upgraded to a three channel power amp so no longer need this.
Has box and receipt.
Still in warranty.
Local Australian stock 240v

From Manufacturer:

Bring Every Note to Life
Robust Output Authentic Experience
The Eversolo AMP-F10 delivers up to 950W in bridged mode and 320W per channel at 4 ohms, ensuring powerful performance across all volume levels. Whether you're enjoying stereo sound at home or experiencing the electrifying atmosphere of live music in a large space, the AMP-F10 delivers impressive power that draws you into an unparalleled soundstage. At 8 ohms, it can provide 200W of power per channel, and up to 650W in bridged mode. At 4 ohms, it can provide 320W of power per channel, and up to 950W in bridged mode.
Faithful Reproduction Pure Sound Quality
With an ultra-low total harmonic distortion of 0.008%, the AMP-F10 faithfully reproduces music in its purest form. From clear highs to robust lows, every note is handled with precision, presenting an authentic and lifelike sound experience. You’ll feel the fine textures of instruments and the natural expression of vocals, as if you were right there in the performance.
Dynamic and Detailed Representation
The AMP-F10 boasts an excellent signal-to-noise ratio of 113dB, ensuring that musical details are preserved from the quietest passages to the most dynamic peaks. From the elegance of classical to the intensity of rock, you’ll capture every nuance with impressive clarity and depth, making every genre come alive.
Versatile and Flexible Connections
Whether your source device uses RCA or XLR, the AMP-F10 handles it effortlessly. Its diverse input options allow for seamless integration to various audio setups, perfectly adapting from Hi-Fi stereo systems to studio gear, delivering a convenient and smooth experience.
Advanced DC Filtering Circuit
The AMP-F10 employs an innovative DC filtering circuit between the main AC supply and audio circuit, effectively removing low-frequency DC interference. This design ensures that only clean AC power is delivered to the audio circuits, effectively enhancing the performance of the audio circuit while reducing the hum from the toroidal transformer.
Clear Sound Free of Interference
By eliminating DC interference from the AC supply, the AMP-F10’s overall performance is dramatically enhanced, delivering a pure audio experience.
High-Fidelity Audio Processing
The AMP-F10 is equipped with advanced dual differential amplifiers, which are tailored for low-level audio signals. Its symmetrical circuit design and negative feedback technology minimize distortion, ensuring high-fidelity and high linear audio output. This design not only expands dynamic range but also effectively suppresses common-mode noise(such as power and environmental interference), keeping the output sound broad and natural at any volume levels.
Powerful and Refined Bass
With a damping factor exceeding 600, the AMP-F10 ensures powerful, clear low-frequency performance. Whether delivering the intense impact of deep bass or capturing subtle low frequency details, it handles all effortlessly. From the punch of electronic music to the gentle whispers of jazz, it caters to a wide range of listening scenarios, empowering every note with emotion and passion.
Superior Sound Enduring Reliability
Designed with durability and stability in mind, the AMP-F10 features premium components and fine craftsmanship for long-term performance. Whether delivering intense volume or supporting extended playback, the AMP-F10 operates reliably, letting you enjoy the pleasures of music worry-free.
1000W Dual-Channel Independent Linear Power Supply
The AMP-F10 is equipped with a 1000W dual-channel independent linear power supply, providing robust, stable power to every note. This design not only prevents interference between the two channels but also provides each channel with dedicated, powerful current. It ensures that the left and right channels deliver independent and balanced performance, resulting in a fuller and more precise stereo soundstage. With a powerful 1000W reserve for high dynamic audio, the low frequencies are impactful and strong, while the mid and high frequencies remain smooth and rich, every emotion and strength in music is released for a truly immersive listening experience.
5 Pairs of High-Current MOSFETs per Channel
To improve the consistency of the amplifier circuit, the Eversolo AMP-F10 uses five pairs of precision-matched MOSFET high-current amplification transistors for each channel. The parallel configuration ensures even current distribution, minimising the potential distortion and inconsistent current distribution issue.
The Eversolo AMP-F10 is not just an amplifier but the dream choice for your audio systems. Whether you’re an audiophile or a home theater lover, the AMP-F10 delivers an unrivaled auditory experience.

This brand needs no introduction, since it's inception and storming into the Hi-Fi world and loved by countless Audiophiles.

Both units; LAiV Harmony DAC and Laiv uDDC purchased NEW directly from the authorised reseller here in Australia. I do have all the receipts and original packing boxes and the aluminium remote for the DAC.

The primary reason for selling is that I unfortunately have the upgrade bug again and will be moving more upmarket.

The Laiv Harmony DAC is 15 months old and the Laiv uDDC is exactly 2 weeks old and likely hasn't even burnt in yet as the uDDC only has about 10 hours on the clock....likely less.

Anyway, my loss is your gain. Hope you enjoy the products as both are built like tanks and performed as hyped as all the hundreds of positive reviews

https://www.laiv.audio/harmony-dac