fidelity4u Posted March 23 Share Posted March 23 (edited) Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Coorparoo State: QLD Payment Method: cash/paypall Reason for selling: Freeing up some cash Further Information: Used a handful of times when I was toying with the idea of modifying some audio circuits and getting into electronic. It's probably 3 years old. Comes with all original leads, etc. Also, I have a set of differnetial probes for high voltage work that can be purchased seperately. It's a good oscilloscipe for analogue work (lots of built-in and customizable math functions for analysing/comparing aspects of anaogue circuits) and it has a proper spectum analyser built-in as well. As such, it's useful for all manner of things, from optimising gain, setting tube bias, analysing harmonic distortions, etc, etc. Pickup from Coorparoo. Alternately, postage can be arranged, as I still have the original box. Details The GW Instek MDO-2102AG is the 2-channel 100MHz oscilloscope in the renewed MDO-2000AG series from GW Instek, which is the successor of the MDO-2102EG. The MDO-2000AG are so-called "Mixed Domain" (MD) Oscilloscopes, giving them the full functionality of an oscilloscope and spectrum analyzer in one thanks to the very strong FFT analysis to the nyquist frequency. Besides that, the serie is expanded with a dual-channel function generator of 25 MHz. Compared to its predecessor, some of the most important features of an oscilloscope have been improved. The MDO-2102AG comes with a sample rate of maximum 2GSa/s and a memory depth of 20Mpts per channel. The series has also been extended with a 300 MHz model. Oscilloscopes in the MDO-2000A series from GW Instek are equipped with an 8" colour screen. With a waveform capture rate of 120,000 waveforms per second, signals can be analyzed quickly with this scope. The oscilloscopes can be connected to a computer with USB and LAN to store the measured data. It is also possible to log the data for a longer period of time. With a minimum interval of 5 seconds it is possible to store the measured waveforms for a maximum of 100 hours to a USB stick in CSV format. It is also possible to print the data directly on printers that support PictBridge. The MDO oscilloscopes have extremely low background noise in the electronics. Background noise affects the accuracy of measurement results at small signals (small-signal). The lower the background noise, the more accurate the measurement. The oscilloscopes offer the possibility of Dual-display, in a screen it is then possible to display the entire signal and a zoomed part of it. This makes it easy to get a good picture of a signal and important parts of it. 100MHz, 2-channel, DSO, Spectrum analyzer, dual channel 25MHz AWG 100 MHz bandwidth 2 channels Includes spectrum analyzer (DC to 1 GHz) Includes dual channel 25 MHz AWG 2 GSa/s real time sample rate 3.5ns rise time 20M per channel memory depth 120,000 wfms/s waveform update rate I2C/UART/CAN/LIN serial bus trigger and decoding function Maximum 1M FFT provides higher frequency domain resolution measurements 8“ WVGA TFT LCD display Edited March 24 by fidelity4u Link to comment Share on other sites More sharing options...
Recommended Posts