Jump to content

HALCRO LOGIC MC20 – 2 CHANNEL POWER AMPLIFIER with 2 1/2 Years Transferable Warranty


Recommended Posts

Item Condition: As New
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: Cromer
State: NSW
Payment Method: Cash on Pickup, EFT
Reason for selling: Downsizing

HALCRO LOGIC MC20 – 2 CHANNEL POWER AMPLIFIER

 

Halcro Logic MC20 Features include:

• 2-channel rack mountable or free-standing multi-channel power amplifier

• 400 watts RMS continuous into 4Ohms

• Unbalanced and Balanced Voltage inputs

• Mains Voltage: 100-120 VAC or 190-250VAC

• Remote trigger switch between On and Standby

• Full control via RS232 or ETHERNET connection

 

Command Functions:

• Switch between On and Standby

• Ability to inhibit individual amplifier modules

• Amplifier module will indicate over-temperature condition

• Amplifier module will indicate over-current condition

• Transferrable warranty

 

SPECIFICATIONS:

 

Power Output

400W RMS continuous into 4 Ohms

Frequency Response (-3db) 5 Hz-45kHz

 

Audio

Inputs, selectable

Unbalanced: RCA sockets

Balanced: XLR sockets

 

Outputs

Internally bridged: Binding Posts

 

Command Functions:

• Switch between On and Standby

• Ability to inhibit individual amplifier modules

• Amplifier module will indicate over-temperature condition

• Amplifier module will indicate over-current condition

• Halcro Reliability Assurance Service

 

Gain

Unbalanced and balanced 29x =29dB

 

Power Supply

Universal swtich mode

Power factos corrected

Fully protected

Compliant in all countries

 

Distortion

THD:<0.007% at 1kHz at all powers up to 400W into 40hms

0.03% at 7kHz at all powers up to 400W

Noise: <30nV/sqrt(Hz) @ 1kHz referred to input

 

Impedance Input

Unblanced: 10k Ohms

Balance:10k Ohms

 

Output Input at 7kHz

<80 milliohms

 

Power Consumption

Idle: <14W

350w with 4Ohm load: 94% efficient

 

Mains Voltage

100-250 VAC

 

Weight:  21.1kg

Height: 169mm

Width: 438mm

Depth: 410mm

 

 

Shipping can be arranged at buyers expense

 

 

1IMG_E2673 (2).JPG

2IMG_2661 (2).JPG

3IMG_E2671.JPG

4IMG_2675 (2).JPG

5IMG_E2666.JPG

Edited by Cromer
  • Like 5
Link to comment
Share on other sites





Been looking for a class D amplifier to use while my class A amp is being repaired which will take a few months sourcing parts. The halcro is a bit more than I wanted to pay but am considering. I would need to courier to the hunter region nsw. 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...
To Top