broadz Posted February 14, 2021 Share Posted February 14, 2021 (edited) Hey guys, Looking at options for a standalone monoaural or bridgable stereo amp that has built in lpf crossovers (or full DSP) much the same as a plate amplifier would have and something that either can have auto sensing or 12v trigger. Power output around 2x250w @ 4 ohms or 1x500 @ 2 or 8 ohms Edited February 14, 2021 by broadz Link to comment Share on other sites More sharing options...
:) Go Away (: Posted February 15, 2021 Share Posted February 15, 2021 (edited) Hypex plate amps are quite good. https://www.diyclassd.com/plate-amplifiers/ But if you want something in a box, then crown xls amps are also good and powerful for subwoofer. This is a PA amp and many have even used in HT setup. May not be everybody's choice. https://www.storedj.com.au/crown-xls1502-power-amplifier-2x-525w-4ohm?SearchID=11663579&SearchPos=2 Both comes with inbuilt DSP. Edited February 15, 2021 by :) Go Away (: 2 Link to comment Share on other sites More sharing options...
broadz Posted February 15, 2021 Author Share Posted February 15, 2021 What's the fan noise like? Thats something that concerns me as the current Crown Macrotechs im using are "a little noisy". Link to comment Share on other sites More sharing options...
Quark Posted February 15, 2021 Share Posted February 15, 2021 34 minutes ago, broadz said: What's the fan noise like? Thats something that concerns me as the current Crown Macrotechs im using are "a little noisy". Most people install a quieter fan. Link to comment Share on other sites More sharing options...
MrBurns84 Posted February 15, 2021 Share Posted February 15, 2021 I have a EP2500 (did the fan mod) which is connected to a minidsp for room correction. Link to comment Share on other sites More sharing options...
Recommended Posts