vsixtyfour Posted March 25, 2016 Share Posted March 25, 2016 Hey guys, I think I already know the answer to this question but I thought I would consult the gurus My amp has a sub signal cable that can be connected from the HT amp to the plate amp on the rear of the sub. It appears to be a standard 3.5mm headphone jack on both ends mono I believe? Just curious if any cable would do the trick (stereo or mono?) or if I should worry about going for a higher grade shielded cable to avoid adding stray interference into the amp or a cheap and cheerful eBay special will do the job. Cheers v Link to comment Share on other sites More sharing options...
dreamz Posted March 25, 2016 Share Posted March 25, 2016 Any single rca cable will do Link to comment Share on other sites More sharing options...
vsixtyfour Posted March 26, 2016 Author Share Posted March 26, 2016 Sorry, just to be clear this is the cable to tell the amp to switch on and expect to receive audio and avoid popping, not the RCA cable that transmits the audio to the sub that I'm referring to. Link to comment Share on other sites More sharing options...
Quark Posted March 26, 2016 Share Posted March 26, 2016 If it's a 12V trigger cable, some equipment will require a mono version. Stereo will work with some equipment, but not all. Link to comment Share on other sites More sharing options...
Recommended Posts