Description
Pair of 2 metre speaker cables.
Pickup from Glebe NSW 2037 or free postage within Australia included.
Description
The multi-award winning Silver Anniversary XT
Silver Anniversary-XT has been specifically designed as the natural replacement for the multi-award winning Silver Anniversary speaker cable. Combining the features of Silver Anniversary with the added enhancement of X-Tube(TM) technology to combat the skin effect and deliver stunning detail.
High performance low density polyethylene dielectric
Cuts down on the amount of audio signal energy lost due to cable capacitance.
X-Tube™ Technology
At low frequencies both X-TubeTM and conventional stranded/solid core speaker cables convey signals in a linear way. However, at high frequencies, X-TubeTM retains a near-linear signal transfer, whereas the conventional cable fails to conduct uniformly across the entire conductor area. The result is that X-TubeTM delivers greater fidelity across the audio spectrum which would other wise be lost in ordinary cables.
Silver plated 99.999% OFC conductors
Provides a low frequency path for the audio signal and delivers stunning high frequency detail.
X-tube technology
At low frequencies both X-TubeTM and conventional stranded/solid core speaker cables convey signals in a linear way. However, at high frequencies, X-TubeTM retains a near-linear signal transfer, whereas the conventional cables fail to conduct uniformly across the entire conductor area.
In standard speaker cables at high frequencies current flow is highest at the periphery with rapidly deteriorating current density towards the centre of the conductor. The effect of this is to reduce the actual cross sectional area of the cable at 15kHz to less than 75% of that at low frequencies. This results in higher distortion and compromises the performance of the cable.
X-TubeTM with polycore technology exhibits much lower self-inductance and is therefore less affected by this problem. The polycore technology reduces loop inductance to levels only achievable using more costly and difficult to terminate cables. The result is more high frequency detail, less distortion and greater performance.
KEY FEATURES:
• High performance low density polyethylene dielectric
• X-Tube™ Technology
• Silver plated 99.999% OFC conductors
Specifications
Wire gauge16 AWG
Unique SPOFC triple braid5 x 16 x 0.1 mm
Jacket OD3.90 mm
Cross-sectional area1.50 mm²
Loop resistance0.021 Ω/m
Capacitance50 pF/m
Inductance0.47 µH/m
Dissipation factor0.0006
The item being advertised is sold "as is", and no warranty should be assumed unless otherwise indicated and agreed between the Buyer and the Seller. Photos representing the item being advertised form part of the description unless otherwise specified.
-
1
Recommended Comments