Class A Audio Posted April 30 Share Posted April 30 Item Condition: Trade in, very good condition with a few scratches here and there. It comes with remote control and interconnectors. Shipping Options: Pickup available and you can audition.,Shipping is available at agreed cost. Suburb or Town: Notting Hill State: VIC Payment Method: Pickup - Cash, Paypal, COD Only Reason for selling: Further Information: Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735 Musical Fidelity Tri-Vista 300 dual mono integrated amplifier with power supply. This amplifier was specially produced in limited series of 500 items, to mark the 40s anniversary of the brand. It is still considered to be the best integrated amplifier ever produced in the brand's history. It has a huge power - 350 watts per channel into 8 ohms or 600 watts per channel into 4 ohms. The amplifier is basically consists of two separate power mono amplifiers and a preamplifier for the left and right channel separately, all built into one case with the total weight of 30kg, and a power supply with separate outputs for the right and left mono power amplifiers and a preamplifier, built into another case of 16kg. Specifications Output: Voltage RMS: 53 Volts 20Hz to 20kHz Peak: 150 Volts Power: 350 Watts per channel into 8 Ohms (25.5dBW), 600 Watts per channel into 4 Ohms Peak-to-peak output current: 96 Amps Damping factor: 210 Output devices per channel: 8 Pre-output impedance: 50 Ohms Line inputs: Harmonic distortion at 1kHz < 0.002% up to 90% power into 4 or 8 Ohms Total harmonic distortion + noise, 20Hz to 20kHz < 0.007% Signal / noise ratio > 102dB ‘A’-weighted Input sensitivity for 350 Watts into 8 Ohms 330mV Input impedance 220K Ohms Overload margin 36dB Channel separation > 70dB 20Hz to 20kHz Frequency response 20Hz to 20kHz, +0, -0.0dB 20Hz to 60kHz, +0, -1.2dB Phono input: Signal / noise ratio > 96dB ‘A’-weighted Input sensitivity 2.5mV (moving magnet) Input impedance 47k Ohms Overload margin 29dB Power requirement: 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), 1200 Watts maximum into 8 Ohms, 104 Watts idle Inputs: 5 pairs line level RCA connectors, 1 pair phono (moving magnet) RCA connectors Outputs: 2 amplifier channels via 2 pairs per channel binding posts. 1 pair RCA audio pre-outputs controlled by the volume setting Weight, main unit: 30 kg, 66.1 lbs unit only, unboxed 35 kg, 77.2 lbs in shipping carton P.S.U: 16 kg, 35.3 lbs unit only, unboxed 19 kg, 41.9 lbs in shipping carton Dimensions, main 483 mm, 19 inches wide unit: 167 mm, 6.6 inches high including feet 480 mm, 18.9 inches deep including terminals P.S.U: 364 mm, 14.4 inches wide 167 mm, 6.6 inches high including feet 480 mm, 18.9 inches deep including terminals 1 Link to comment Share on other sites More sharing options...
mfforever Posted April 30 Share Posted April 30 Have had mine since 2011 and it is a fantastic amp ........... have it paired with Yamaha 5000NS speakers and high quality streamer and DAC , Townsend speaker cable and IC ........ and boy, can it sing ........ hey, I'm biased, but I've heard many good systems over the years, but if you love vocals , great timing and beautifully integrated bass , the MF TriVista 300 is really something .... read the reviews for a bit of an insight into what this amp can do. Link to comment Share on other sites More sharing options...
Recommended Posts