Jump to content

Music Hall Fidelity MMF7 turntable

Recommended Posts

Item Condition: Good
Shipping Options: Pickup available and you can audition.
Suburb or Town: MacMasters Beach
State: NSW
Payment Method: Cash on pickup
Reason for selling: Cash for restoring a vintage turntable

Further Information

I'm selling an MMF 7 turntable with ProJect 9 tonearm fitted with Goldring 2200 MM cartridge.


When I bought it, the MMF 7 was close to the top of Music Hall’s range and its features are:

·       Split plinth, belt-driven design with "floating" top chassis assembly

·       16V AC motor assembly in its own enclosure, mounted on a resonance damping puck

·       ProJect 9 tonearm

·       Gold-plated RCA jacks

·       Goldring 2200 high output, moving iron cartridge (moderate use = less than one LP a month during my 4ish years of ownership)

·       Heavy acrylic, low resonance platter

·       Hinged, perspex dust cover

·       Screw-down record puck

·       Three adjustable cone-point feet and dimpled coins

·       Bubble level set into plinth


I’ve had this lovely turntable for about 4 years but I’ve recently bought a Technics DD restoration project (SL1100) and I've been convinced we don’t have room for two turntables. The turntable operates as it should and is in good cosmetic condition (the perspex cover shows a normal level of scuffs for its age). I've just replaced the drive belt (custom-made) because the old one was cracked and tired.


Here is a review in Stereotimes for the turntable.


I am the second owner of this turntable and I believe they originally retailed for over $AUD1,500. The latest version, the MMF7.3, includes some design tweaks to the plinth, motor (AC to DC motor) and tonearm (V9 to V9cc?), which retails for $2,800


MMF 7 specifications:

Outboard 16V/50 mA AC power supply
Speeds: 33 1/3 rpm, manual commutation to 45 rpm
Deviation from nominal speed: +/- 0.5%
Wow and flutter: +/- 0.08%
Signal to noise ratio: -70 dB
Tone arm: 9 inch effective length, overhang: 18 mm
Platter diameter/weight: 11.8 inches/3.15 pounds
Table dimensions (inches/cm): 18.5/47 W × 14.2/36cm D × 5.3/13.5 H (with dust cover)
Weight: 11.3 kg












  • Like 1
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...
To Top