ozfifer Posted August 6, 2023 Share Posted August 6, 2023 Hi All, Im hoping this has been posted in the correct forum and that any Kenwood buffs will be able to help. Ive recently acquired a Bronze face plate model of the KA9150 and although working i need a new level control attenuator part number is R24-900405. Ive done a search but not coming up with anything so hoping some one here may be able to assist with either the spare part or where i can source one. Thank you Regards Tom Link to comment Share on other sites More sharing options...
bob_m_54 Posted August 7, 2023 Share Posted August 7, 2023 So it's a 4 gang pot, with 2 X 250K MN taper, and 2 X 200K linear taper. Won't be easy finding a new one. You can't clean the pots with Deoxit or similar, or is it physically damaged. Link to comment Share on other sites More sharing options...
ozfifer Posted August 7, 2023 Author Share Posted August 7, 2023 1 hour ago, bob_m_54 said: So it's a 4 gang pot, with 2 X 250K MN taper, and 2 X 200K linear taper. Won't be easy finding a new one. You can't clean the pots with Deoxit or similar, or is it physically damaged. @bob_m_54 it had non standards parts that fit poorly with fly leads supporting the PCB Link to comment Share on other sites More sharing options...
bob_m_54 Posted August 8, 2023 Share Posted August 8, 2023 OK, this is why you don't buy stuff that is listed as "refurbished" "upgraded" "recapped" etc. unless you have a very good look under the hood first... 1 Link to comment Share on other sites More sharing options...
Recommended Posts