Jump to content

Recommended Posts

Posted (edited)

Further information:he C32 is a dual stereo preamplifier with a built-in monitor power amplifier. There are two totally independent left and right stereo program lines running through the preamplifier. One program line is the listen program line. the other is the record program line. Each program line can select its own program source from any connected input signal i.e. phono, tuner, aux or tapes 1, 2 or 3 without interference with the other program line.T
MCINTOSH C32 Stereo preamplifier
Frequency characteristic     20Hz-20kHz+0 -0.5 dB
10Hz-100kHz+0 -0.5dB (at the time of Equalizer OFF)
Distortion     0.05% or less (at the time of 20Hz - 20kHz, and an Output power)
Input sensitivity/impedance     Phono1, 2:2mV / 47kohm (65pF)
AUX, Tuner, Tape1, 2 or 3:250mV / 50kohm
A hum and a noise     AUX, Tuner, Tape1, 2, 3:IHF 100dB, 90dB (with no auditory sensation weighting)
Phono1, 2:IHF 90dB, 80dB (with no auditory sensation weighting)
An Output voltage/impedance     Main output: 2.5V / 5kohm (at the time of a rated input)
Tape output: 0.25V / 5kohm (at the time of a rated input)
A monitor, headphone, and a line output     12W+12W (8 ohms, 20Hz - 20kHz, 0.1% of distortion)
5Vrms (a 600-ohm line, with a level control)
Special-NetWare-program equalizer     30Hz, 150Hz, 500Hz, 1500Hz, 10000Hz
Two octave each frequency bands (a 12dB boost and cut)
line feed character filter     A flat and -12 dB/oct. (50Hz or less)
HF filter     A flat and -12 dB/oct. (7kHz or more)
Voltage amplification
(decibel, an equalizer, and a filter are flat locations)     
Input     Main     Tape1, 2, 3     Monitor amplifier
AUX, Tuner :     20dB     0dB     20dB
Tape1, 2, 3 :     20dB     0dB     20dB
Phono1:     62dB     42dB     62dB
Phono2:     62dB     42dB     62dB
The semiconductor used     Transistor: 67 pieces
IC: 35 pieces
Diode: 62 pieces
FET: Two pieces
Silicon rectifier (SCR): One piece
AC plug socket     Automatic ON/OFF plug socket (green): Two lines
Switchpoint type plug socket (black): Four lines
Power source     AC120V, 50Hz/60Hz
Power consumption     25W-85W
Dimensions     Main unit: Width 381x height 127x depth of 330.2mm (pan nowait-lock included)
Front panel: Width 406.4x138.1mm in height
Weight     11.79kg
IN ORIGINAL WOOD CASE with Manual
NB 120VOLT Need step down transformer ! I can supply.
 

 
Photos:

 

PLEASE READ

  • If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved
  • If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item
  • If you don't include photographs of the actual item being sold, your ad will not be approved
  • You understand that a reasonable donation for selling fees is expected upon successful sale of your item
    - if you have previously sold items and not made a donation, your advertisement may not be approved.

c32.jpg

c32c.jpg

c32d.jpg

c32l.jpg

c32m.jpg

c32n.jpg

c32a.jpg

a32b.jpg

c32f (2).jpg

Edited by smart
Update info

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...
To Top