Jump to content

Recommended Posts

Posted

My opinion is to go for 2 lower btu units instead of one big btu one. Faster to have the whole area cool down and avoid hotspot if the whether is hot.

 

My previous place, I did replace 2 original with one and regret. Fan swing left/right/up/down also no use. Lol... in the end, install one more.

 

Hope it help.

 

Posted

For optimal cooling/coverage for the whole area, likely need 2 FCUs to do the job. Otherwise condenser would be

working 100% most of the time.

Posted

I would suggest that you have 2 FCU. Bigger capacity FCU blowing to areas where you have more people seating and where your hifi equipment generating heat. Smaller FCU blowing area where there are low usage.

Posted

If $ not issue, have 2 x System1 for the living room.

 

To be more $ effective, have 2 x System2 for the living room, with each condenser also powering another bedroom.

 

Assuming 1 living room + 3 bedrooms, 2 x System2 (as above), plus 1 x System1 (for MBR).

Posted

How one configure the air con depends also on usage pattern. If it is required to work with the rooms at the same time, avoid connecting with the room. If you are not likely to on both together, can connect 2 x sys 2 , each with one room + living. This will avoid stressing the compressor.

 

In audio context, like high power amp driving speakers, effortless most of the time cost operating way below the max.

 

Sent from my IN2010 using Tapatalk

 

 

  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...
To Top