Jump to content

Recommended Posts

Posted

Bought this at $390 but never once used it at all.

 

Letting it go at $280 $250

 

You can pm or contact me at 91838407

Deal at Punggol.

 

QED is proud to present the new peformance active HDMI cable designed specifically for use at high speed over cable runs up to 15 metres in length.

A brand new design concept from QED which utilises QED 'Active Filter[emoji769] Technology' delivering high speed up to and including 15m. Until now it has been difficult to achieve support for 3D, Deep Colour or 4K video resolution over the long distances required for modern high performance projectors. It is often necessary to employ expensive booster boxes which require external power supplies or use cables with a difficult to hide “electronic bulge” inconveniently situated half way along. QED Performance Active HDMI changes all that by introducing Active Filter Technology[emoji769]. A dedicated integrated circuit especially developed to provide High Speed data performance over long cable runs is built unobtrusively into the head shell of each cable.

 

Independently tested to deliver High Speed w/Ethernet and exceed the requirements of the latest HDMI specification. Supports Full HD, 3D, 4K and Deep Colour.

 

Special active electronics built discreetly into the head shell that is designed to extend the High Speed performance of the cable up to 15m. It is so discreetly done in fact, that the head shell has to be specially marked so that the cable can easily be installed the correct way around with the Active Filter at the “display” end. The signal is filtered to remove unwanted components of the signal above and below the required frequency band and the remaining signal is amplified to the original level. This means that features such as 3D, 4K and Deep Colour can be enjoyed over long distances.

 

Performance Active HDMI measures at less than 50ps of jitter, significantly reducing the incidence of bit errors reaching the TV and maximising the audio and video data transfer.

 

QED is the only UK manufacturer able to test HDMI cable designs beyond the scope of the current HDMI specification, which means it is uniquely placed to evaluate new technical innovations before deciding whether or not to introduce them into full production. QED has identified cable induced timing error, termed ‘jitter’, as one of the key differentiators between satisfactory and outstanding cables. These findings have enabled us to optimise transmission speed and jitter performance to ensure that both exceed the high standards we set for our Reference cable range.

Naturally, because QED customers demand better, we have scientifically designed our cables to reduce jitter to the absolute minimum.

 

4e5509d0d0205cc56063383f585200f8.jpg

 

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...
To Top