littlemart Posted June 9, 2020 Posted June 9, 2020 Tisbury Audio Domino Phono Preamp The Domino is a versatile, high performance phono preamplifier. Selectable gain settings and input loading allow any MM or MC cartridge to be used. Ultra high-spec components along with our laser engraved walnut and aluminium enclosure achieve high-end sound and build quality but without the price tag. Any Cartridge, Any Amp Domino has four switchable gain settings: 40, 49, 58 and 67 dB. This allows virtually all cartridge, from high output MM to low output MC, to work with any amp. Particularly handy if you’re also using our Mini Passive Preamp, as you won’t have to worry about system matching. Passive RIAA Equalisation RIAA equalisation is achieved with a passive filter located between two separate gain stages. This configuration gives the best of all worlds: low noise, high accuracy, and exceptional sonic performance. 0.1% thin film resistors and 1% polypropylene film capacitors result in an exceptional 0.2 dB RIAA accuracy. Linear Power Supply with Off Board Transformer Domino’s power supply uses an off board 15 V AC transformer (not to be mistaken for a switch mode DC adaptor, it won’t work with DC) keeping electrical noise away from the sensitive gain stages. This gives hi-fi grade, linear regulated power rails in a small package, without having to worry about hum or ground loops. Handmade in England Our products are designed, made, and tested in our London workshop for true British quality hi-fi. Technical Specifications Gain setting: 40 dB 49 dB 58 dB 67 dB Sensitivity for 300 mV out 3.0 mV 1.0 mV 0.38 mV 0.13 mV THD, 1 kHz at 1 V out <0.001% <0.001% 0.003% 0.004% Noise, A-weighted -91 dBV -88 dBV -74 dBV -70 dBV Crosstalk at 1 kHz -103 dB -97 dB -77 dB -76 dB Overload margin at 300 mV out 30 dB 30 dB 30 dB 28 dB RIAA accuracy ±0.2 dB, 20 Hz – 20 kHz Input capacitance 220 pF Input impedance Selectable 100 Ohms (MC) or 47 kOhms (MM) Output impedance 82 Ohms Maximum output voltage 9 V RMS Enclosure Laser engraved American black walnut and aluminium Size D x W x H 139mm x 105mm x 60mm Power supply 15 V AC 500 mA adaptor. Do NOT use with DC adapters. Selling at $325 Popularity – :):):) Reviews “The Domino exceeded my expectations, and then some… It’s a quiet, balanced and superbly competent performer – and just downright enjoyable to use. For the price, it’s an amazing accomplishment.” Read the full review at wallofsound.ca “The Tisbury Audio Domino is a rare thing, sounding like it was built up to a quality target, not down to a target price. It will outlast turntable, arm and cartridge upgrades.” Read the full review at tnt-audio.com “By far the best phono I’ve heard anywhere under 200, and I’d be happy if I’d spent 400. Friends who side by sided it with me have been amazed by what it can do.” Read more customer reviews at ebay.co.uk . . . You can google your own for more ::) mini Passive Preamplifier A simple line controller with audiophile acclaimed sound quality. Use it to switch between multiple sources, connect multiple amps, control active speakers or add outputs for a subwoofer, headphone amp or just about any line-level device. Key feature: - SMD Stepped Attenuator (1% tolerance thin film SMD resistors, ±0.25 dB channel balance at all levels, gold plated contacts) - New Look, More Inputs and Outputs (3 inputs, 2 configurable outputs) - Selectable Fixed Attenuation (0 dB, -10 dB, -20 dB. Set by switches on base) - Configurable Outputs (Variable – level set by volume control and Variable or Loop. Set by switches on base) - Input Impedance: 10 kOhms - Output Impedance (at full volume): 0 Ohms - Power Supply: None (it’s passive!) - Handmade in UK (Handmade American black walnut facia and anodised aluminium body, laser engraved markings) Selling at $325 Popularity – :):):) See the Review here: https://littlemart.wordpress.com/category/products-review/pre-amps/ --------------------------------------------------------- Premium LP/ Vinyl/ Turntable carbon fiber Anti-Static Mat Product standard parameters: size: diameter 298mm Thickness: 1mm Material: 4k carbon fiber design Usage: Place the LP mat on the Vinyl/Turntable before place the record. Vinyl tone pad can effectively suppress the external resonance and vinyl record rotation of a slight swing, so that it runs more stable and smooth, the pickup to have a better pickup environment, greatly enhance the read vinyl information Volume, so that more details of the music to reproduce the transparency of the sound increased significantly, the knot becomes more clear, the background becomes more quiet, relative to the sound field is more cohesion, a variety of musical instruments have a deeper depth , Exquisite and natural, let you experience the real musical instrument performance and presence of a broad sound field performance. Selling @ $85
Recommended Posts