synthesis1624705793 Posted March 2, 2013 Posted March 2, 2013 Hi Guys, Can help identifying this CD transport? It's from Bada HD-22SE. Literature only says "Sony Laser Head and Transport, Phillips Servo Mechanism". Any more detail info if I want to search for replacement, like part number, etc. Laser is fine but tray in and out is rough and a bit slanted. There's also occasional rubbing sound when spinning. Do you think SLT have it? Thanks.
laborator Posted March 7, 2013 Posted March 7, 2013 its a sanyo mechanism/laser head. sf p101 i think. if you can take photo without clamp bar it very informative.
synthesis1624705793 Posted March 7, 2013 Author Posted March 7, 2013 There it is. Yes it looks like Sanyo SF P101. That part is fine but the tray mechanism is the problem. Thanks for the lead!!
laborator Posted March 7, 2013 Posted March 7, 2013 its sanyo sf-p101n 16 pins, you can count coils of the laser assembly (around the lens) must has 4 coils and just to make sure, you can count the pin on ribbon connector. u can try to fasten four suspended screws, put vaseline grease around the rails-left and right side- to make sure the tray mechanism in line with laser mechanism.
Recommended Posts