Jump to content

FS: 3x Tannoy 12" Drivers + Crossovers Suit DIY Cheviot/Monitor Build - NEW

Recommended Posts

Item Condition: New
Shipping Options: Shipping is included in price.
Suburb or Town: Tasmania
State: TAS
Payment Method: PayPal, EFT, Cash
Reason for selling: NLR

I purchased these brand new with intentions to build cabinets like the Cheviot (but slightly larger volume of 79L) and use the others in a home theatre upgrade, but have since purchased some other speakers and no longer required. They cost over $1100 each to import and are brand new in box and come with complete crossovers. Ready to build cabinets and you have a fine set of Tannoys at a fraction of the cost of current retail models.


I have 3x drivers total I am willing to part with and the listed price is per speaker including shipping anywhere in AUS. If you are interested in all 3 in one lot I can discount a bit as shipping will be less, happy to sell a pair or single aswell.


Driver is a CMS1201DC installation speaker.




Frequency Response (-3 dB) 60 Hz - 20 kHz
Frequency Range (-10 dB) 45 Hz - 30 kHz
System Sensitivity (1W @1m) 97 dB (1W = 2.83V for 8 Ohms)
Nominal Coverage Angle 90 Degrees Conical
Coverage Angle (1kHz to 6kHz) 90 Degrees Conical
Directivity Factor (Q) 8.9
Directivity Index (DI) 9.5
Rated Maximum SPL Average: 120 dB
Peak: 126 dB
With THP 60 - Average: 115 dB
Power Handling Average: 200W
Program: 400W
Peak: 800W
Recommended Amplifier Power 400W @ 8 ohms
Nominal Impedance 8 ohms
Transformer Taps 70V: 60W / 30W / 15W / 7.5W / OFF
100V: 60W / 30W / 15W / OFF
Crossover 1.6 kHz - 2nd order LF, 2nd order HF
Low Frequency 1 x 300 mm (12.00") Dual Concentric™ constant directivity driver with treated cone
High Frequency 34 mm (1.34") aluminium done with neodymium magnet system
Backcan 1.6 mm black powder coated steel, damped with 11 mm OSB board
Baffle 1.2 mm black powder coated steel
Grille 1.0 mm white powder coated perforated steel
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Cable Entry Options 20 mm and 28 mm on knockouts
Conduit Knockouts 4 sides + top
Connectors Terminal barrier strip inside the can, with loop thru capability
Dimensions (H x W x D) 13.03" (331 mm) x 28.54" (725 mm) 20.31" (516 mm)
Net Weight 17.4 lbs (7.6 kg)







Cheviot Cabinet.gif


Edited by 81Vintage
Price Drop
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...
To Top