Jump to content

FS: Luxman 507x integrated amplifier


Recommended Posts

Item Condition: Good
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: Sydney
State: New South Wales
Payment Method: EFT, cash on pickup
Reason for selling: Downsizing as I have 3 systems

Further information: FS a very nice vintage Luxman integrated amplifier with built in phono. Two phono inputs and 3 Aux inputs. Please look at photos. One knob missing a piece. Can connect upto 4 speakers. Can also be used as  preamplifier. Also listed in the classifieds on SNA is a matching Luxman Tuner T-300V and PD370 turntable. Other equipment in the photos are for illustration purposes only and are not part of the asking price for the Luxman integrated amplifier. Happy to discuss a combined price for the Integrated, TT snd Tuner if a buyer is interested in putting together a matching vintage system.

 

Can deliver within 50kms of Sydney CBD. 
 

Can also be used as a Headphone amplifier as this is built in. 

 
Photos:

 

31B9FD27-BD3D-4FB5-96E2-D0438BDB2EB0.jpeg

F5621E40-70A3-4855-AC69-5FE12245EEA9.jpeg

5FA13A16-0945-4F97-9E36-40304F8B16EC.jpeg

0C8AF129-4B58-4B3D-AA59-AF7FF121429C.jpeg

Edited by Tax
More info
  • Like 2
Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Similar Content

    • By BGH
      Item Condition: Like new Shipping Options: Pickup available but audition is not available.,Shipping is included in price. Suburb or Town: Bentleigh East, Melbourne State: VIC Payment Method: EFT, Cash on pickup Reason for selling: Downgrading Further information:
       
      I am the second owner of this amp, it was originally purchased March 2021. Receipt, box, remote and all accessories are included. Unit is in mint condition and hasn't even had the plastic protection removed from the LCD etc.
       
      Great unit for the money but the hardware is a bit overkill for my setup so I have downgraded to smaller amp for now and just looking to recoup the $$$.
       
      Photos:


    • By olegau
      Item Condition: Good working order Shipping Options: Pickup available and you can audition. Suburb or Town: Melbourne State: VIC Payment Method: Cash on Pickup Reason for selling: surplus Further information:
       Vintage Luxman R-1030 receiver amplifier The amp is in good working order. It had full serviced recently. Speaker A terminals replaced with banana plugs. Specification: https://www.hilberink.nl/codehans/luxman48.htm
      https://www.hifiengine.com/manual_library/luxman/r-1030.shtml
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.
    • By Demondes
      Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is included in price. Suburb or Town: Hawthorn State: VIC Payment Method: Paypal, EFT, Cash on Pickup Reason for selling: Trying something different Further information:  Up for sale is the wonderful Luxman EQ-500 phonostage, that has 3 inputs (for 3 different arms or turntables).  This phonostage is approx 2 years old, and I am the first owner, it was bought from a dealer here in Melbourne and is local stock (via audioactive).  It accepts a range of MM and MC cartridges.  I have successfully paired this with a Lyra Delos, ZYX 4D, Goldnote Donatello all MC.  Although the ZYX was probably a little low (0.24mV) to ideally pair gainwise with the EQ-500, it prefers MC cartridges with an output above 0.4-0.5mV or above as output into system preamp.
       
      NOTE:  the switch that says 36dB, 38dB and 40dB is the gain increase for MM cartridges, the equivalent for MC-Low its 63dB, 65dB and 67dB and MC-High setting 55dB, 57dB and 59dB.
       
      The stereo/mono switch and the Low (rumble filter) are handy features for vinyl playback.  The Analogue meters and lighting are nice cosmetic features that make the device look good on any rack.
       
      There are no marks or scuffs on front panel or overall casework.
       
      I have the original double boxing (Luxman branded interior box and the external travel box in good condition and happy to include Australian shipping and insurance in stated price, therefore some haggle room for a local pickup in Melbourne
       
      NOTE: There is 1 set of additional tubes include in sale (6 in total excluding excluding a second rectifier tube ECC81).
      Original JJ ECC83 x 4 (currently installed in the eQ-500) +  second set Electro Harmonix 7025EH x4 Original JJ ECC82 x 2  +  second set Genalex Gold Lion ECC82 x 2  (currently installed in the EQ-500)  
      Original Stock Tubes are all JJ and still have plenty of hours left on them, they would have approx 600-700 hours max on JJ tubes.
      the replacement tubes probably have around 80 hours on them
       
      The EQ-500 currently has installed the following 7 tubes
      4 x original JJ tubes ECC83 1 x original JJ Rectifier (ECC81) 2 x Genelex Gold Lion ECC82  
      plus the additional 6 tubes will be included inside the box
       
      Link to the PDF manual can be found here https://luxmanamerica.com/wp-content/uploads/2019/06/EQ_500_AG00987E41A_en_press.pdf
       
       
      Luxman EQ-500 Specification
      Circuiting system SRPP, final stage cathode follower
      Non-feedback CR type equalizer Vacuum tube used ECC83 x 4 pieces, ECC82 x 2 pieces,
      and EZ81 x 1 piece Input sensitivity (1kHz, When the gain is set to 36dB) MM: 4mV
      MC: high 0.44mV, MC: low 0.18mV Input impedance MM: 30kΩ to 100kΩ (variable)
      MC: high 40Ω, MC: low 2.5Ω Rated output/output impedance 250mV/850Ω Gain(1kHz, When the gain is set to 36dB) MM: 36dB
      MC: high 55dB, MC: low 63dB Maximum allowable input (1kHz) MM: 300mV, MC: high 34mV,
      MC: low 13mV RIAA deviation MM/MC high/MC low:
      20Hz to 20kHz (±0.3dB) Channel separation (10kHz) 65dB Input Unbalanced line x 3 Output Unbalanced line x 2, Balanced line x 1 Power supply 230V~(50Hz) / 115V~(60Hz) Power consumption 47W External dimensions 440(W) x 92(H) x 397(D) mm
      front side knob of 5mm and rear side
      terminal of 12mm included in depth Net weight 12.5kg (main unit) Accessories Power cable  

      Photos:
       

       
    • By muzzagruzz
      Item Condition: Excellent Shipping Options: Shipping is available at agreed cost. Suburb or Town: Miranda State: NSW Payment Method: EFT Reason for selling: NLR Further information:
      Free delivery in Sutherland Shire LGA! 

      This has the balance of five years warranty. 
       
      Selling this beautiful, as new, VPI Prime turntable that I purchased in August 2018 from Krispy Audio. 
       
      This is a supremely quiet turntable that extracts every detail and nuance from vinyl recordings. The motor is dead quiet and spins the heavy 10kg platter very quickly and accurately. 
       
      Beautifully made as with all VPI Industries turntables. This example is in as new condition - no marks or scratches anywhere to be seen as I look after my equipment. 
       
      Technical specifications: 
       
      Chassis Composition: Vinyl Wrapped MDF and Steel
      Platter Type & Size: 12" Aluminum, 20lbs
      Tonearm Included: JMW-10-3D Tonearm
      Motor RPM: 300 RPM (this could be 600 RPM in Australian examples?)
      Motor Pulley Accuracy: +/- .0005"
      Wow and Flutter:  .05%
      Speed Accuracy:  .05%
      Rumble: 80 db Down
      Footprint: 19 ½" x 13 ¾"
      Overall Size: 21 ⅜" x 15 ¾"
      Total Weight: 44lbs
       
      Comes with all inclusions: record clamp; instructions; box
       
      Cartridge and Nordost tonearm cable in the photos not included. 
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.













    • By muzzagruzz
      Item Condition: Mint Shipping Options: Shipping is available at agreed cost. Suburb or Town: Miranda State: NSW Payment Method: Cash EFT Reason for selling: NLR Further information:
      Purchased new by me from Addicted to Audio to store my Focal Elear headphones. I stuck the headphones in them and shoved it in a draw and that's basically where it stayed. 
       
      Perfect condition, no marks. 
       
      Comes with original box. 
       
      Photo with headphones for illustration only. Not included in the sale (just in case you were wondering). 

      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.












×
×
  • Create New...
To Top