Pearso888 Posted January 19, 2020 Posted January 19, 2020 I need some advice will this adaptor work with the chord mojo and if so is the output balanced? Its a dual 3.5mm TRS to balanced XLR.
aasza Posted January 19, 2020 Posted January 19, 2020 (edited) 1 hour ago, Pearso888 said: I need some advice will this adaptor work with the chord mojo and if so is the output balanced? Its a dual 3.5mm TRS to balanced XLR. Simple Answer : No Although the Mojo has a pair of 3.5 mm outputs, it is single-ended only and does not support a balanced headphone connection. 1 of the 3.5mm is headphone out rated @ 5V the other is Line-Level out rated @ 3V Edited January 19, 2020 by aasza
PicoWattson Posted January 19, 2020 Posted January 19, 2020 Logical question though Glen as some DAC/HP amps with dual output jacks can be operated in balanced mode like the Mytek Manhattan for example.
Pearso888 Posted January 20, 2020 Author Posted January 20, 2020 Thanks for the reply guys, 19 hours ago, aasza said: Simple Answer : No Although the Mojo has a pair of 3.5 mm outputs, it is single-ended only and does not support a balanced headphone connection. 1 of the 3.5mm is headphone out rated @ 5V the other is Line-Level out rated @ 3V Aasza, Do you know which output is which? How do i tell?
aasza Posted January 20, 2020 Posted January 20, 2020 51 minutes ago, Pearso888 said: Thanks for the reply guys, Aasza, Do you know which output is which? How do i tell? You can use either one for headphones or both simultaneously to run 2 sets, to put it in line out mode you have to follow a procedure as stated in the manual. http://www.chordelectronics.co.uk/wp-content/uploads/2016/09/Mojo-Manual28072016.pdf
Recommended Posts