What is a good remote for a miniDSP 10x10Hd?

[andyr]

The miniDSP 10x10Hd manual says:

"the 10x10Hdcan “learn” the control codes of your current remote, if it supports one of the following remote control codes:
* NEC
* Sony
* Philips RC6"

I have decided to 'get with it' and buy a new, dedicated remote for my 10x10Hd (as I do not have any other remotes in the room that my hifi system is located).

I'd be grateful for some advice:

• Is it just a matter of going to an electronics store and buying a remote for an NEC / Sony or Philips RC6 TV?

 

• Or is there a better remote, specifically for the 10x10Hd?

Thanks,
Andy

Edited December 6, 2019 by andyr

[andyr]

As I have now solved this problem ... I thought I would post the result, in case anyone else wants to use a remote with a miniDSP unit.

 

I discovered that the Logitech 'Harmony 650' lists the miniDSP 10x10Hd as a device it is compatible with.  So, I then bought a Logitech 650.  However, the Logitech Harmony web-site is not clear on how to program the 650 to control a 10x10Hd. 

 

First try was a failure - so, as the 10x10Hd understands 'Sony code', what I ended up doing was specifying on the Harmony web-site that I was going to control a Sony TV (I plucked a model no. from the Internet).  Sony code was then downloaded to the Logitech 650 - and this enabled me to change from one stored config to the other on the 10x10Hd by pressing buttons '1' thru '4'! 

 

Andy