LongtimeListener Posted January 24, 2019 Posted January 24, 2019 Hi All, just wondering whether a i2s DAC (Allo Boss sitting on a raspberry pi) is able to be connected directly to my Musical Fidelity X-Can V3 headphone amplifier. Usually you have to go through a proper amplifiers tape connection with it. Thanks in advance Cheers
rand129678 Posted January 24, 2019 Posted January 24, 2019 1 hour ago, LongtimeListener said: Hi All, just wondering whether a i2s DAC (Allo Boss sitting on a raspberry pi) is able to be connected directly to my Musical Fidelity X-Can V3 headphone amplifier. Usually you have to go through a proper amplifiers tape connection with it. Thanks in advance Cheers Hi. Looking at the manual, should be straight forward. Just connect a pair of RCA cables between the Allo Boss DAC and the "line in" of the X-Can V3 and you should be good to go.
LongtimeListener Posted January 24, 2019 Author Posted January 24, 2019 2 hours ago, Music2496 said: you should be good to go. Hi Music2496, thanks for your advice. Yes, thought so but wasn't quite sure. Will try this... Cheers 1
LongtimeListener Posted January 24, 2019 Author Posted January 24, 2019 Confirm now works great. I had to switch off the hardware mixer in volumio but now the sound is breathtaking good... Thanks again
Recommended Posts