Jump to content

Recommended Posts

Posted

Hey all.

The manual for the HD-XE1 indicates that if you select 'auto' for the HDMI output in the Audio menu that, depending on the AVR, it will output the bitstream. I've got a new Denon 3808 which will handle any format, but all I can see coming from the HD-XE1 on the 3808 display is PCM, even DTS-MA. Am I missing something here?

Regards,

Allan

Guest clay_tone
Posted
Hey all.

The manual for the HD-XE1 indicates that if you select 'auto' for the HDMI output in the Audio menu that, depending on the AVR, it will output the bitstream. I've got a new Denon 3808 which will handle any format, but all I can see coming from the HD-XE1 on the 3808 display is PCM, even DTS-MA. Am I missing something here?

Regards,

Allan

Check which firmware version you have installed - 2.8 or 2.9 (cannot recall which) gives you the option of selecting 'Digital Direct Audio' - which will then bitstream over HDMI.

Posted
Hey all.

The manual for the HD-XE1 indicates that if you select 'auto' for the HDMI output in the Audio menu that, depending on the AVR, it will output the bitstream. I've got a new Denon 3808 which will handle any format, but all I can see coming from the HD-XE1 on the 3808 display is PCM, even DTS-MA. Am I missing something here?

Regards,

Allan

The manual is referring to bitstream of DD and DTS, not HD codecs which require digital direct audio mode to be turned on. When released the XE-1 didn't have this option so its not in the manual, it was added in 2.7 or 2.8 i think.

Once digital direct audio ode is on the other audio settings dont matter.

Hakka.

  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...
To Top