Guest Mlor Posted November 15, 2008 Posted November 15, 2008 Hi All, Ok I have brand new PANY pz800a, tuned everything is working fine. Now I hook my new DP-P1 via hdmi and get nothing. I am a newb but seems self explanatory. What am i doing wrong ?
tonymy01 Posted November 15, 2008 Posted November 15, 2008 Press the TV-Out button on the Wiz remote until you get to PAL-HDMI. Wait a few seconds until the image displays (HDMI takes a few secs to negotate). Then go into the Wiz setup menu and setup 1080i or 720p or whatever you think is best for your TV (probably 1080i for any true-HD displays). I think this is in the Wiz manual? Regards
Guest Mlor Posted November 15, 2008 Posted November 15, 2008 Press the TV-Out button on the Wiz remote until you get to PAL-HDMI. Wait a few seconds until the image displays (HDMI takes a few secs to negotate). Then go into the Wiz setup menu and setup 1080i or 720p or whatever you think is best for your TV (probably 1080i for any true-HD displays).I think this is in the Wiz manual? Regards Thanks tonymy01 I missed that in the manual however I did read it. Next question ? Why is the sound softer when viewing thru dp-p1 then when watching the tv direct ?
tonymy01 Posted November 15, 2008 Posted November 15, 2008 Have you adjusted the Wiz volume to 50? Actually, 46 is the sweet spot (thus AC3 HD and MPEG SD channels sound at a similar volume level), once you set it there, don't touch this again, audio volume levels should be changed on the appliance with the speakers, such as the TV, amplifier etc, not the boxes feeding the audio thru. Also make sure if your TV can't decode AC3 audio to setup the Wiz to 2 channel output. Regards
Recommended Posts