Jump to content

Recommended Posts

Posted (edited)

Just noticed that Panasonic have on their Website a new model 50PZ80A (as well as 50PX80A, 50PZ800A and 50PZ850A). Now I know that they may be pulling the 50PZ800A so is this the replacement? And Why? It must be because the 50PZ800A is too damn close to the 50PZ850A (and some would say better). The only differences I can see are 1 less HDMI port, different PC-In and a slightly different A/V arrangement.... (Oh and a slightly less RRP)

Anyone know more about this?

Edited by flashman1207

  • Replies 35
  • Created
  • Last Reply

Top Posters In This Topic

Posted
Just noticed that Panasonic have on their Website a new model 50PZ80A (as well as 50PX80A, 50PZ800A and 50PZ850A). Now I know that they may be pulling the 50PZ800A so is this the replacement? And Why? It must be because the 50PZ800A is too damn close to the 50PZ850A (and some would say better). The only differences I can see are 1 less HDMI port, different PC-In and a slightly different A/V arrangement.... (Oh and a slightly less RRP)

Anyone know more about this?

This wasn't on the press release with the other new panny's! Maybe you should edit the title of this thread as according to the website there is a "new!" TH-42PZ80A as well. :D

Posted

Running a comparison on the Panasonic web site shows the following differences between the 50Z800 and 50Z80 and the 42Z800 and 42Z80:

Number HDMI Ports - 2 on 80's, 3 on the 800's

Dimensions - 80's slightly lighter, higher, thicker, not as wide

Different stereo systems

Maybe some changes to Picture Quality improvement Functions, but this may just be a name change

Slightly differnt Picture modes

Price

Posted
Running a comparison on the Panasonic web site shows the following differences between the 50Z800 and 50Z80 and the 42Z800 and 42Z80:

Number HDMI Ports - 2 on 80's, 3 on the 800's

Dimensions - 80's slightly lighter, higher, thicker, not as wide

Different stereo systems

Maybe some changes to Picture Quality improvement Functions, but this may just be a name change

Slightly differnt Picture modes

Price

Anyone there know if there is PQ difference between 50Z800 and 50Z80? if no they are the same I prefer 80A as its cheaper??? -)

Posted
Anyone even seen a PZ80A in the flesh?

I saw PZ80A last Sat in HN. NH claimed its exclusive to them by Panny. since they were not side by side showing different material, its hard to tell if its the same PQ. got quoted $2500/1yr. Not so confident with HN exclusive products, i might still go for 800A, anyone there bought for a good price wanna share?

Posted
I saw PZ80A last Sat in HN. NH claimed its exclusive to them by Panny. since they were not side by side showing different material, its hard to tell if its the same PQ. got quoted $2500/1yr. Not so confident with HN exclusive products, i might still go for 800A, anyone there bought for a good price wanna share?

Why would anyone pay $2500 for it when you can get a higher spec 800A for the same money (apparantly)

Posted
Why would anyone pay $2500 for it when you can get a higher spec 800A for the same money (apparantly)

there are lots of people say they bought or get quoted 800A for $2500, unfortunately i shopped around last weekends it seems no one is offering below $2600. At least please let us know which store you bought from or scan the receipt...

Posted
there are lots of people say they bought or get quoted 800A for $2500, unfortunately i shopped around last weekends it seems no one is offering below $2600. At least please let us know which store you bought from or scan the receipt...

Haven't bought one yet, waiting to see what the 50PZ80A is going to do to the price..... As I posted earlier though JB online had the 800A for $2423, untill they pulled it at around 5pm EST and others have posted receipts in the HDTV price wiki

Posted
I saw PZ80A last Sat in HN. NH claimed its exclusive to them by Panny. since they were not side by side showing different material, its hard to tell if its the same PQ. got quoted $2500/1yr. Not so confident with HN exclusive products, i might still go for 800A, anyone there bought for a good price wanna share?

The PZ80's are on the Panasonic web site. Webprice also has them 42PZ80 for $1,999 and 50PZ80 for $2,599. I think the HN rep is telling porkies about them being exclusive to HN.

Webprice - Panasonic

Posted
The PZ80's are on the Panasonic web site. Webprice also has them 42PZ80 for $1,999 and 50PZ80 for $2,599. I think the HN rep is telling porkies about them being exclusive to HN.

Webprice - Panasonic

Just looked at todays junk mail and see a Retravision catalogue showing a TV which reads like the 50PZ80 for $2799. It looks like one,lists "fullHD" ,2 HDMI ,and is a "new release"

Unless they are using the wrong picture,and the 2 HDMI is not a mistake,it's the 50PZ80 for sure.

So much for HN exclusive.

  • 2 months later...
Posted

They have the 50PZ80A for $2248 at Domayne. Seemed that there was a bit of negotiation still left in that price. Was gonna give them my best offer before I noticed the 'Made in China' sticker on the back. That put me right off. Pity as it comes a close 2nd to a Pioneer in my mind. Just wished it was as aesthetically pleasing as a Samsung. Is 'Made in China' such a bad thing?

Posted
They have the 50PZ80A for $2248 at Domayne. Seemed that there was a bit of negotiation still left in that price. Was gonna give them my best offer before I noticed the 'Made in China' sticker on the back. That put me right off. Pity as it comes a close 2nd to a Pioneer in my mind. Just wished it was as aesthetically pleasing as a Samsung. Is 'Made in China' such a bad thing?

I have a PZ80A and its a great TV PQ is great I am really enjoying it.

Cheers Bob

Posted

Same I have the 50PZ80A. Great Picture... Xbox has been getting a smashing...Plus BD movies :)

Got it for 2.2k At Clive Anthonys in brisbane...

Cheers,

Jake

Posted

i havn't seen this tv compared to the 800, but side by side to the px80 the tv's are pretty much identical except for the amount of pixels.

where as i have seen px80 next to pz800 before and the pz800 also appeared to have a better image processor with teh signal it was being fed.

has anyone compared PX80 to PZ80 to see what other differences there are? as yeah they look identical, ecept you can see 1080p vs 720p pixels up close, when both set to the same default preset settings of standard or whatever it was.

Posted
They have the 50PZ80A for $2248 at Domayne. Seemed that there was a bit of negotiation still left in that price. Was gonna give them my best offer before I noticed the 'Made in China' sticker on the back. That put me right off. Pity as it comes a close 2nd to a Pioneer in my mind. Just wished it was as aesthetically pleasing as a Samsung. Is 'Made in China' such a bad thing?

Not any more, nearly everything is made there !!!!!!

  • 2 weeks later...
Posted

I think the 850 is made in Japan but it's much more expensive.

I saw the TH-50PZ800A and the TH-50PZ80A side by side last night and I cannot see any differences in PQ.

Do both models offer the same calibration options?

Posted

Apparently the differences are quite obvious. I just saw the 'VIERA 2008/2009 Product Line Up' pdf from the Oz Panasonic page and it states the Z80 don't have "Intelligent Frame Creation" called 100Hz Motion Picture Pro 2 and "24p Real Cinema" is also missing. Both are 800 and 850 only.

I wonder what the "Deep Color" feature on the 850 is...

  • 2 weeks later...
Posted
Apparently the differences are quite obvious. I just saw the 'VIERA 2008/2009 Product Line Up' pdf from the Oz Panasonic page and it states the Z80 don't have "Intelligent Frame Creation" called 100Hz Motion Picture Pro 2 and "24p Real Cinema" is also missing. Both are 800 and 850 only.

I wonder what the "Deep Color" feature on the 850 is...

From what I've read in other threads (don't ask me exactly which) the "Intelligent Frame Creation" is not such a big deal.

Many say they are turning it off - the picture is better without it.

Other differences b/w the PZ80A and the PZ800A are:

- Only 2 HDMI inputs on the 80 and 3 on the 800

- different "Stereo"setup" - "NICAM-B/G German(A2)" on 80A and "PAL 2CS Stereo" on 800A -- ??

- 80A includes "Picture noise reduction"and 800A does not.

This iinfo is available at the Panasonic site.

http://panasonic.com.au/products/category.cfm?objectID=4848

Has anyone seen good prices on either of these units in Melbourne?

Nobody seems to have them in stock at the moment.

thedonkee

Posted
From what I've read in other threads (don't ask me exactly which) the "Intelligent Frame Creation" is not such a big deal.

Many say they are turning it off - the picture is better without it.

Other differences b/w the PZ80A and the PZ800A are:

- Only 2 HDMI inputs on the 80 and 3 on the 800

- different "Stereo"setup" - "NICAM-B/G German(A2)" on 80A and "PAL 2CS Stereo" on 800A -- ??

- 80A includes "Picture noise reduction"and 800A does not.

This iinfo is available at the Panasonic site.

http://panasonic.com.au/products/category.cfm?objectID=4848

Has anyone seen good prices on either of these units in Melbourne?

Nobody seems to have them in stock at the moment.

thedonkee

Hi all,

I'm looking at both these tvs the only other difference I can see is the pz800 has 24p real cinema playback and the pz80 has 24p film playback

Can anyone tell me if this one and the same or two different things

Posted (edited)

Howdy

24p Real Cinema on the 800 is supposedly technically superior to the poverty pack 24p film playback mode on the 80.

From what I have read on these forums most owners seem to be reporting that they don't use the 24p Real Cinema mode as it can sometimes yield weird results on fast pans etc. I personally like the 3D effect it gives and that it has the option of being switched off.

I saw the PZ80 & PZ800 next to each other playing Casino Royale on Blu-Ray and the 800 looked much nicer with greater depth when the 24p mode was on (almost 3d like) and I saw no stutter when the credits were rolling (unlike the PX & PZ which did stutter)

As mentioned previously, the 800 also has the following benefits over the 80

- Swivel Stand

- Front HDMI Input (I find it weird that the lower PX80 has a front HDMI but not the PZ80)

The PZ800a seems to see to sell for around $300 more than the PZ80 which equates to a 15% premium. Sometimes there's too much choice!

Edited by funkybits
  • 1 month later...

  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...
To Top