Guest wilbs01 Posted May 25, 2008 Posted May 25, 2008 hi all (esp renura if you're out there ) i've had the tinyusb2 for about 2 years. actually packed it away for a while cos i had the same problem i'm getting now.. using MCE and a dell laptop with tinyusb2 everything's working nicely (signal strength about 85%) until after a shutdown and restart. when i load up MCE and try 4 a tv channel it reports that there is a loss of tv signal. one of the blue light on the tuner is on but the other one showing signal isn't. if i unplug/replug the tuner, it works again. this is mainly an issue for scheduling programs cos nothing gets recorded. all drivers are updated, tuner is plugged into my monitor (and the blue light stays on after shutdown so power to the device isnt the prob) any help is much appreciated cos it'll save me big money as i'll have to buy a PVR or something otherwise! cheers wilbs
Guest wilbs01 Posted May 25, 2008 Posted May 25, 2008 answering my own post (so sad), i did a bit more searching and found this thread http://forums.dvbowners.com/index.php?show...=5274&st=20 this texass44 guy seemed to b having the same issues as me. looks like renura replaced it. anyone else out there had this problem and got it fixed?? helllllp!
renura Posted May 25, 2008 Posted May 25, 2008 There could be a number of reasons why what you describe can happen, Including issues with the MB, USB ports, OS, etc and of course the possibility that device is faulty/damaged/etc. (although that device failure rate was around 0.2% from memory). You can try and determine what it is by trying the device in different PCs/USB2 ports/OSs, if possible. The case you mention is one of those rare ones where the device was faulty and was replaced under warranty.
Recommended Posts