ho-downer Posted October 28, 2004 Posted October 28, 2004 just hooked up a Digicrystal 8000 & can't get ch 9 ,All other channels are perfect. Does anybody know what frequency they are on?? Ho-downer
Dik Posted October 30, 2004 Posted October 30, 2004 9s LCNs are on channel 8 - 191.6 MHz Best of luck, Dik
Digicruiser Posted October 31, 2004 Posted October 31, 2004 Able to get 9 now? In my area, there's something interfering with Analog 9 and 8 is not far away - VHF Digital signal is less even they are from the same transmitter site. Have UHF Digital access in your area? Antenna pointing to the city? cheers
ho-downer Posted November 24, 2004 Author Posted November 24, 2004 just hooked up a Digicrystal 8000 & can't get ch 9 ,All other channels are perfect. Does anybody know what frequency they are on?? Ho-downer <{POST_SNAPBACK}> Thanks. No probs now Dik,but ch 9 appears to have a very weak signal .sometimes it takes 10-15 seconds to come on and when it does it tells me that ch 9 has an unstable signal. . still unable to get the new ch 31 whose frequency is 548.224 MHZ ho-downer
alanh Posted November 24, 2004 Posted November 24, 2004 ho-downer, Firstly you will not get channel 31 on a STB because it is only avaliable in analog. Re Channel 8 & 9 in metropolitan areas they are on the same tower and it is not a problem. Post your location here and I will see if there are alternatives. The type of antenna you are using is also a help. AlanH
ho-downer Posted November 27, 2004 Author Posted November 27, 2004 ho-downer,Firstly you will not get channel 31 on a STB because it is only avaliable in analog. Re Channel 8 & 9 in metropolitan areas they are on the same tower and it is not a problem. Post your location here and I will see if there are alternatives. The type of antenna you are using is also a help. AlanH <{POST_SNAPBACK}>
ho-downer Posted November 27, 2004 Author Posted November 27, 2004 Hi Alanh, All ok now. I reset the the box and started all over again for about the tenth time and after this last try it seems to be working fine. Fingers crossed Thank you for your input. Ho-downer
Recommended Posts