Search the Community

Item: Pioneer TX-8100 AM/FM Tuner Location: Brisbane Price: $100 Item Condition: Good - Walnut Cabinet shows signs of age Reason for selling: NLR and having a vintage hifi clearance. Payment Method: Pickup - Cash, Paypal (+2.6%), Bank Transfer Extra Info: Good old Analog vintage Tuner, higher end model. Works well, though the Signal strength meter backlight not working. Prefer local pick up, but happy to pack it up securely for shipping via courier. Pictures:

Item: Sony TA-1066 Integrated Amplifier Location: LWA HQ, 64 Burns Bay Road, Lane Cove, NSW Price: $120 Item Condition: Very good Payment Method: Cash, Paypal, Credit cards, Bank Transfer Extra Info: One for the collectors! Vintage Japanese built Integrated Amp of 1974 AND it's in very nice condition for it's age. Sounds great and it actually presents well with very little cosmetic wear. A little bit of treasure from the past, well worth preserving. Specifications Power output: 20 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 60kHz Total harmonic distortion: 0.8% Damping factor: 22 Input sensitivity: 2.5mV (MM), 250mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Output: 250mV (line), 30mV (DIN) Semiconductors: 22 x transistors, 6 x diodes Dimensions: 410 x 120 x 280mm Weight: 6kg Pictures:

Item: PIONEER PL-71 Turntable Location: Brisbane (Prefer Pick Up) Price: $700 Item Condition: 7/10 Reason for selling: Gathering Dust Payment Method: Pickup - Cash, Paypal (+2.6%), EFT Extra Info: Nice example of top line fully manual Pioneer turntable 1970's beast, it's rather large and heavy. It's in good working order and includes the original Pioneer headshell, the Ortofon 2M Bronze cartridge and headshell is included, has been well used estimate 700-800 hours but still sounds great and looks clean under magnification. The lid is great for its age and a polish up would give it a new lease on life. Some points to note: The lid has a crack at the rear right hand hinge (Aesthetic problem only see photo), The walnut plinth has a chip on the front right hand side corner (see photo), the tonearm rest clasp holder had broken and has been glued back in to place - has been like this for several years now and not been a problem, The cue lever seems to lower faster than usual may need some attention. Overall it's in good condition and works well. Prefer local pick up, or I can assist with drop off to a pack and send if you require packing and postage for delivery. Cheers Pictures:

I’m selling a lovely vintage Pioneer SA-8500 MK-II Stereo Amplifier. Made in Japan 240v model Dual transformer design - The sound signature is typical Pioneer of the period sporting a wonderful analogue experience Specifications below thanks to www.hifiengine.com Power output: 60 watts per channel into 8Ω (stereo) Dimensions: 420 x 150 x 376mm Weight: 13.9kg The amplifier works as it should on both channels and on all inputs - bias is set to factory spec and the amp has had all its electrolytic capacitors replaced excluding the original power supply capacitors. All controls have been cleaned for smooth and quiet operation. Original NEC output transistors in place. Presented in very good cosmetic condition with minor imperfections in line with its age - the lid has some surface rust and serial number engraved I was going to get this powder coated but opted to keep original to let the new owner decide to leave it or have it repainted to their desired colour. Overall presents very nice but most importantly sounds wonderful. Melbourne pick up only due to the size and weight of this amp A donation will made to stereo net post the sale

hi guys im new to this forum. i have been lurking around these forums but couldn't find anything about the diatone f1. i do know that diatone was a super premium brand. but ive got a really good deal on a pair of diatone f1's ( 300$) speaker seems to be in amazing condition. yet i wanna know is it a great buy or do i have better options? these are the specs of the speaker please help me out guys. thank you in advance! System 2 ways, 2 speaker bass-reflex system, and a book shelf type Use unit For low-pitched sound: 30cm corn type For loud sounds: 5cm semi dome shape Rated impedance 6ohms Play frequency band 35Hz - 20000Hz Output sound pressure level 93dB/W Crossover frequency 1500Hz The maximum input 60W Level control High region: Three positions Dimensions Width 370x height 670x depth of 350mm Weight 25kg

Item: Pair of Gale 301's with stands, all Black Location: Melbourne, 3103 Price: $350 Item Condition: Good for there age Reason for selling: NLR Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Have been using these as a rear channel for the last 2 years bi-wired, Boxed for nearly 10 prior to that . In good working order brought these back from the UK years ago. The stands are a Heybrook type and suit a HB1, complete with adjustable isolation spikes . There are some marks on the veneer cabinets but veneer was thicker in the days when these were built. The steel grills are all good. No original packaging. Photos: Advertisements without photos of the actual item will not be approved.

Item: JBL L100 Speakers Location: Ballarat, Victoria Price: $1000 now $950 Item Condition: Very good Reason for selling: Want to try something different Payment Method: Pickup - Cash, Bank Transfer Extra Info: Up for sale is a wonderful pair of L100's, rare in this condition. As far as I'm aware, I'm only their third owner from new. I purchased these about nine months ago off Gumtree, from a collector of vintage hifi. The cabinets and veneer are free of the major dings and scratches you might expect. There are of course a couple of minor dings but these can't be seen from more than a couple of metres away. Additionally, the foam rings surrounding the tweeters have been replaced and the blue grilles are new replicas, sourced from the US. In the interest of full disclosure, a couple of points. There is a slight 'yellowing' on part of one of the white bass drivers. This doesn't affect it's performance and, again, it's only significant up close. Also, the model number plates on the front of each speaker need a little bit of glue; both are coming off at one edge. Due to size and weight pickup is strongly preferred; however if the buyer so arranges I an drop these at my local Pack and Send. Please forgive the picture quality; my camera's getting fixed so I only have the iPhone. Pictures:

Dear audiophile, I'm just wondering whether anyone could recommend an experience and qualify service person to do the following with reasonable fee and charges. . Vintage stereo restoration . Vintage stereo clean up and revitalise . Turntable proper set up, cartridge installation and alignment.... Many thanks.