Search the Community

The streamer comes configured as a Roon endpoint, but can we switched over to Volumio upon request.

Further Information: Used for a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Bluesound Node 2 Streamer with inbuilt DAC I am the 2nd owner and only selling to update with Bluesound. Overall in good condition, with original packaging, instructions etc. and accessories. Posted to all States add $20

Further Information: Used for a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

The Bludento BLT-HD is a Bluetooth streamer/DAC that includes Qualcomm aptX and aptX HD streaming protocols. It easily pairs with your phone and enable direct streaming from your smartphone to your stereo / home theatre system. I used it when exploring streaming technology into a mainstream hi-fi system and I was very impressed at the performance, especially considering its low cost. I have long ago moved onto another streamer that enables me to stream NAS-stored files as well as streaming services, hence this is no longer required. It contains a Texas Instruments PCM5102A DAC and also has SPDIF and optical digital outputs so you are free to use an alternative DAC and retain this as a convenient streamer. Specifications: Bluetooth version 5.0 BT range up to 30 metres Supported Codecs: aptX, aptX Low Latency, aptX HD, SBC, AAC, FLAC, TFF, MP3 Outputs: Stereo analog RCA, Optical digital (Toslink) 24-bit, SPDIF digital Input Power: 5V DC (not supplied), 200 mA micro-USB (supplied) Output Voltage: 2.1 V RMS Output Impedance: 57 Ohms DAC: Texas instruments PCM5102A Freq Response: 10 Hz - 20 kHz (+/- 0.5 dB) Signal to Noise Ratio: 112 dB THD: < 0.02% Latency: 30 milliseconds Included: BLT-HD unit, cheap included RCA-RCA leads, RCA-3.5 mm audio adapter, micro USB cable, User Guide Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item - if you have previously sold items and not made a donation, your advertisement may not be approved.

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Designed and made in Germany. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Designed and made in Germany. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Designed and made in Germany. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Pioneer N50A-K Network Audio Player, Black Audiophile network player featuring twin transformers, Twin Sabre Ultra DAC, USB DAC up to 192 LCPM and 2.8/5.6 MHz DSD Playback, AirPlay, DLNA, Spotify and vTuner. Great entry level network streamer dac. Won What HIFI Best Streamer in the GBP100-500 pound bracket. Plays DSD, Streams, and has great on-board DAC. Full specs below. I have moved on to its larger brother the N70AE so this unit is not required. Its clean, near perfect condition. It's hardly been used as it was in my second system.

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Designed and made in Germany. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Designed and made in Germany. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: What Hi-Fi? Awards 2022 winner RRP $2995.00 In excellent codiction PRODUCT DETAILS 4 digital inputs Balanced XLR and Single ended RCA analogue outputs Optical and coaxial digital outputs GoogleCast, Airplay2, uPnP Streamer Roon Ready certified MQA supported 32-bit ESS9038Q2M Sabre DAC Full I/P and RS232 control including Control4 and Crestron Total harmonic distortion noise = 0.0008% https://www.whathifi.com/reviews/arcam-st60

Further information: This is the flagship model of the Matrix Audio Element series. This unit is a combined Hi-Res network streamer, pre-amp, headphone amp and Digital to Analogue Converter. Element X combines years of development and tuning experience with the industry-leading ESS ES9038PRO DAC chip. Unit was purchased new November 2019 and is in great condition. It comes with remote control, original manual and power cord. Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that upon successful sale of your item it is expected you pay Seller's Fees. - if you have previously sold items and not made a contribution, your advertisement may not be approved.

The unit is just one week old - available with all original accesories / docs & packing. P1 sits just below the flagship X1 - has won practically most of the 2022 audio reviewes awards and is an excellant audio hub, offering Streaming, DAC and a Pre-Amp. Comes with dedicated remote. Plenty of information and feedback availble for online reading. PayPal will be additional 4.1%

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)

Further Information: Used for less than a year, sat on the rack the whole time, mint condition. Compact, beautiful and powerful. Modified N-core, best Class D amp ever heard, neutral with a touch of warmth, managed floor standing speakers effortlessly. Designed and made in Germany. Dual AK4493 in mono mode, + AK4137 re-sampler. Ultra low jitter MEMS Femto Clock. Roon Ready, TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect. 2 x 500 W @ 4 Ohms (1200 W max). Great headphone amplifier included. Source II D/A converter Resolution: 768 kHz/32 bit and DSD 512 Dynamic range: >125 dB THD & Noise: <0.001 % (@ 0 dB FS) Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSD Converter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-sampler Network player Ethernet: 100 Mbit/s WLAN: Dual-band 802.11a/b/g/n/ac, WPS support Bluetooth: 4.2, A2DP USB: High-speed host interface for hard disks, USB sticks, DVD ROM drives. Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution: 44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz) DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128) Gapless playback Streaming services: TIDAL Connect, Qobuz, Deezer, HighResAudio, Spotify Connect Internet radio and podcast Roon Ready Analog preamp Inputs: two analog line inputs with 50 kOhms of input impedance. Outputs: one balanced and one unbalanced output. The outputs may be used independently. Volume level control range: 0 to 80 dB in 1 dB steps Frequency response: 2 – 200 kHz (-3 dB) Headphone amplifier Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Damping factor of headphone output: >100 POWER 1000 Power consumption: 0,5 W stand-by, 16 W operation, 1200 W max. XLR Inputs: analog line-level inputs Output power: 2 x 500 W @ 4 Ohms Gain: 25,5 dB THD: < 0,003% Frequency response: 1 Hz – 45 kHz (-3 dB) Signal-to-noise ration: > 110 dB Automatic switch-on Protection circuits Lindemann (lindemann-audio.de)