Search the Community
Showing results for tags 'JVC'.
-
Doesnt look like JVC has sat on their hands... with releasing two of "worlds smallest" in the new DLA-NZ700 and DLA-NZ500 laser native 4k Projectors 35% smaller than Nz7 model up and looks like they have redesigned everything ! check out here in the news release pdf uploaded on home cinema france... https://www.homecinema-fr.com/wp-content/uploads/2024/09/HCFR-JVC-DLA-NZ500_700-news-release.pdf
-
Further Information: Selling my much loved JVC NX7. Pickup is ideal as it's a very heavy projector, though I do have the original box if the buyer is willing to pay for shipping. Welcome to see the unit in action if picked up and sold before Mid-May, as after that I'll need to take it down as we're moving house. Could also do a video call or something if you'd like to see it running before coming out. • 1,900 Lumens with high power lamp • 80,000:1 Native Contrast Ratio for deep blacks • 800,000:1 dynamic contrast ratio • New 0.69 inch Native 4K D-ILA Devices (x3) • 17-element, 15-group all-glass 65 mm diameter high-quality lens • Two 18Gbps HDMI/HDCP 2.2 compatible inputs • ISF (Imaging Science Foundation) licensed • HDR10 Compatibility with Auto Tone Mapping • Wide Color Gamut (Over 100% DCI P3) • 1.89:1 (17x9), Fully Compatible with 16x9 (1.78:1). Throw information based on a 16:9 aspect ratio
-
Hey all, Hoping you guru's can advise me here. I have a JVC QL-F4 which I love dearly, it currently runs a AT95e cartridge. Its nice enough but its due for a new stylus. I also have a number of older carts including the Z1s which is probably the original for this deck. (all these carts came with the table when I purchased) By all reports the Z1s is a nice cart so I would like to get a stylus and test it out. I'm looking at the Jico SAS item. So my questions; 1) Am I crazy and should I stick with at AT unit instead? 2) Is this the right stylus - http://www.jico-stylus.com/product_info.php?products_id=1293 Confusingly its listed under "Victor Nivico", who presumably manufactured it? 3) I also have a Shure M75ED II, a Shure M75-6S and a Jelco MC-14. Are any of these half decent? The rest of my setup consists of a Cyrus 2 (+PSX which should arrive this week thanks to a forum member!) and a pair of Richter Paladin's. Many thanks, Ash
-
Hi all, Just recently I came across an ad on Gumtree, For sale was an old jvc system with 4 speakers, no pictures, that's it. Went to investigate, and what i found was quite something. The system is from the 70's i believe, consists of: JVC 4VR-5436X Fm-Am 4 Channel Stereo Receiver with built in CD-4 Demodulator (Quadraphonic) - http://www.thevintageknob.org/jvc-4VR5436.html JVC SK-12 4 Way 6 speaker boxes with wood lattice - pair JVC VS-5399 Bi-directional rear speakers - pair - http://www.thevintageknob.org/jvc-VS-5399.html A woman was selling it, i don't think she realised what she was selling. All she wanted was $20!!!!!!!!!! SOLD All the pieces are in fantastic, original condition, and the receiver works beautifully. The SK-12's are unbelievable for something from the 70's! Does anyone know what the REAL resale value of this system is? Thanks
- 15 replies
-
- Quadraphonic
- JVC
-
(and 2 more)
Tagged with:
-
A bit of background, I have owned a few projectors, a couple of epson LCD projectors over the years and then the last few years been very happy with a JVC X-35 projector. So Ultra UHD is on our door step ... of course as I am very enthusiastic about these things what should I do ? The obvious would be one of the new Sony 4K projectors...but then have seen the flagship sony 1100ES that retails at over $25k being humbled by my few generations old base model jvc. and even the cheapest 4K sony is some $15k !!!! way more than what I would want to spend and then to top off I find all the sony models in some way or the other dont fully support the new UHD format with either lacking HDR (high dynamic range) or lacking support for the DCI p3 wider gamut that the new format will support. And then I find out JVC has a new range...something that has been 2 years in the making.... http://cdn.jvc.eu/dla-x9000/index.html And unlike the Sony's it built for UHD, utilising a new 4K E-shift 4, and is HDR and wider gamut p3 DCI capable. But hey is it true 4k? The shift for jvcs has always been a 1080p panel that they shift really fast diagonaly to essentially upscale. However according to the jvc info the new 4k e-shift 4 is an evolution of this that takes a 4k signal splits into two frames diagonally and utilises a half pixel diagonal shift with the 1080p panel to create a 4k frame. Something JVC gives a brief explanation of, http://cdn.jvc.eu/dla-x9000/feature01.html Now I am pretty skeptical, though apparently a technology co developed by JVC and japans NHK engineers, that had them develop a 8k projector http://www.pmaresearch.com/pma-blogs/jvc-announces-8k-resolution-projector-with-e-shift-technology/ so a trickle down for 4k consumer projector cant be too much of a stretch hey ? Anyways 4k is beyond Imax and I have no intention of putting in a setup of greater scale than imax so not really chasing 4k. My interest is the other aspects of UHD with HDR and wider gamut and if I get any gains in resolution than what we have ...i'll happily take it with local pricing placing the base model X5000 at $6,160, mid range model X7000 at $8,800 and top model X9000 on $10,450 (not including 3D glasses..but fortunately I already have them from my previous JVC) So as it happens...before I know it ...it turns out I am the first person in the country ordering one of these JVCs ! I go for the piggy in the middle. since the base model uses the previous generation light engine, doesnt quite cover the p3 wide gamut and also quite a bit down on contrast vs the previous years models. And the top model is really only the mid range model with some hand picked parts......so the x7000 model it is for me And I am then one of the first in the world to be receiving one of these black boxes ... on my birthday ! and posting an unboxing...
-
My JVC X3 produces a great image but for the last few years the remote control has not worked. It didn't really matter as I could reach the controls on the unit. However I recently had some lamp problems and I stumbled across a thread on the AVS forum that described how to fix the IR (and maybe the lamp) on the X3. See the link below. Apparently a capacitor was installed the wrong way around in the original build. So I followed the instructions and sure enough when I reversed the cap the IR started working again. The procedure is very simple. So many thanks to the AVS forum and all that posted. If you have an X3 the fix is real. http://www.avsforum.com/forum/24-digital-hi-end-projectors-3-000-usd-msrp/1296327-official-jvc-rs40-x3-owners-thread-336.html
-
An outstanding turntable motor from the golden age of Japanese audio , as they say. I’m not sure what it’s worth, but a non working one went for $200 on eBay recently. There are lots of cool plinth designs for these on the web. its 100v and I can provide a trans former
-
Further Information: Experience unparalleled home entertainment with the JVC DLA X-7500 4K 3D projector. With a pixel shifting 4K technology and DLP display technology, this projector delivers stunningly clear and vibrant images that will transport you to another world. - THX 3D Display - Dynamic contrast - 1,300,000 - Brightness -1900 Lumens - Lamp hours - 2300 - High contrast ratio of D-ILA projectors delivers images with full of presence -Complies with the HDCP 2.2 standards to enable 18Gbps 4K signal input - Smooth, vivid and high-definition. 4K quality as only D-ILA makes possible. - Original 4K e-shift Technology continues to evolve If you are searching for this model, you already know how rare they are. The picture quality is as good as the new generation projectors which cost a fortune. They come for sale very rarely so dont miss the opportunity. Happy to demo if you are serious about buying. Pick up Brookfield 3338 or Delivery at buyers risk and expenses.
-
Further Information: JVC DLA-X3 Projector, IT's working ok in couple years before I upgraded to N7. It's the power board to bed fixed, I don't have the time and dont bother to get it fixed. Bulb in the machine is about 800 hours, the spare bulb is only 100 hours. I did not clear the timing of bulb in the machine. You better know what y are purchasing, it's not working, comes with spare bulb. and remote.
-
Further Information: Have original box, remote, etc. This projected is ISF colour calibrated by Mike from Avical for both SDR and HDR content, including Apple TV 4K and Oppo BDP 205 Darbee. Price is slightly negotiable for serious buyers. DLA-N7 4K-resolution D-ILA Projector Equipped with new 0.69-in 4K D-ILA devices Newly developed digital driver LSI for native 4K device 65 mm-diameter high-resolution all-glass lens 1,900 lm Light Output 80,000:1 Native Contrast Ratio 800,000:1 Dynamic Contrast Ratio Supports High Dynamic Range (HDR10, HLG) content Supports Wide Colour Gamut (DCI-P3).
-
Further Information: -I am in the process of dismantling/changing my Home Theatre room which will be converted into a small media type room as circumstances have changed. I no longer have the room/need for a Projector anymore. This is an amazing Projector especially in 3D or 4K content. People can’t believe how clear it is. JVC DLA-x7900 – Black – THX Certified, full 3D with only 264hrs and original packaging/box. https://www.jvc.com/in/projectors/d-ila/dla-x7900be/ ($6500 RRP) TOTAL PACKAGE Includes: -115" 16:9 Majestic Fixed Screen w Evo Ultra 4K & Fidelio Velvet frame as standard - With Lifetime Warranty ( $2000 RRP) – can leave as is or be dismantled -4 X Expand Vision 3D Glasses ($400 RRP) -Peerless PRG-1 Ceiling Mount and Model specific JVC Base place ($480 RRP) -Digital Light Meter (never used as was happy with picture on THX or HDR Mode) https://www.projectorscreens.com.au/16-9-majestic-4k-screens/115-16-9-majestic-fixed-screen-w-evo-ultra-4k-and-fidelio-velvet-frame-as-standard-with-lifetime-warranty-free-shipping.html I’ll throw in a few 3D movies to get you started! Any Questions or more photos, just ask. *Victoria only or can do interstate if buyer organises courier as I don’t want to be responsible for any damage in transit. Screen will be too hard to ship due to size.
-
Item: JVC DLA-X7900/9900 Price Range: Fair Market - Dependant upon model, age, condition Item Condition: Used Extra Info: MUST BE: AUS stock. Prefer like new/excellent condition with low hours.
-
Item: JVC DLA NX9 / N9 Price Range: ~12k Item Condition: Used Extra Info: Looking to get a JVC DLA NX9 / N9 projector. I'm located in Ceduna, SA, so can pick up from Adelaide/Port Pirie etc probably. Otherwise I'm fine with getting it posted to me! Cheers!