Jump to content

tassiepete

Member
  • Posts

    13
  • Joined

  • Last visited

Reputation

0 Neutral

About tassiepete

  • Birthday March 18

Profile Fields

  • Region
    Australia
  • Location
    Tasmania

Recent Profile Visitors

562 profile views
  1. Banana plug terminated I had these running in a 25mm conduit inside a wall to conceal
  2. 'Balanced low level signal cable' I was using this for a subwoofer interconnect, but no longer required Few small surface dings in cable sheath, as I had them running through a 25mm in-wall conduit to conceal.
  3. 60cm tip to tip v. good condition, not used anymore and am cleaning out the cupboard
  4. Great little MM/MC that has served me well. Moving on a I am simplifying setup, removing boxes and using the phono in my integrated. MM: 47k ohms/120pf. MC: 100 ohms/120pf. 16v transformer included - original Photos:
  5. Thanks, I managed to get it sorted. It was just a bit gummed up as it hadn't been used in a couple of years (in storage while building a house). I took the case off and have the mechanism a good one over. Then loaded a CD about 50 times and it is working consistently now. The place of purchase advised this route as it was out of warranty and could be a simple fix.
  6. Hi All, I'm having trouble with my Rotel slot load CD player (RCD1570) It's not pulling discs in properly, makes a little bit of noise and jerks/jolts them a bit. It doesn't happen all the time, but mostly when inserting rather than ejecting a disc. any ideas??
  7. Hi, I'm having an issue with my Rotel RCD1570 slot load CD, its not pulling discs in Any suggestions for getting it looked at / fixed in Launceston, Tasmania?
  8. Further information: 250W class D subwoofer (500W peak), Black Ash finish 10" woofer & 10" down firing passive radiator. 3m QED 'Performance Audio-1' RCA interconnect pair. In excellent condition , small chip on the top front edge of veneer and slight fading of finish on top surface (see image). Purchased about 3 years ago. I had been using this with a Rotel RA1570 and a pair of B&W 685 S2 stand mounts in a big room (5x6m with 3.6m raked ceiling) and it filled out the bottom end really well. However, I have moved house and the HiFi now lives in a much smaller room and the B&W's produce plenty of bottom end due to their position closer to walls. I have no need for a sub in this room so am looking to move it on. 384x336x255mm and weighs 15.4Kg. Happy to ship at agreed cost and will double box and pack as required. Description from external website: When you want to experience more from your movies and music, the SDS-10 steps up to deliver peak power output of 500W using a 10" custom Sunfire driver that is mated to a 10" down-firing radiator. Twice the woofers for twice the bass! The SDS-10 incorporates Sunfire's wide-band, energy efficient Class D amplifier and produces twice the output of its smaller sibling - while only consuming a half a watt in standby. Sunfire's exclusive FFDTM technology results in superior fidelity, higher output and with lower distortion than the competition. Woofer design: 10" Front firing active woofer, down firing passive radiator Amplifier Power Output: 250W RMS / 500W Peak Soft Clipping Circuitry Auto Turn-On Crossover Adjustment: 30-150Hz inf. var. Crossover Bypass Phase Adjustment: 0-180° inf. var. Connections Inputs RCA Inputs/Outputs Gold Plated Connections Detachable Power Cord Finish: Black Ash Finish Black Grille
  9. It was a little convoluted. It was a little easier for me as I only had one sonos device and didn't need to run a split system between S1 and S2. The app was easy, just downloaded the new 'sonos' app from googly play and then deleted my old sonos app (which is now called sonos S1. TBH I can't remember how i did the hardware, even through it was only 3 weeks ago. I'm pretty sure it was through the new S2 app (although i seem to remember download an additional hardware update app). It did keep all of my playlist and library setting which was nice. BTW - really enjoyed your podcast
  10. Sonos connect, recently upgraded to S2 software. I have been running this through my integrated amp's DAC via coax using FLAC up to 24/48 and it sounds great. Will de-register it from my account once sold. This has not been used as an upgrade for a new sonos device. I was holding out on this sale until S2 was release, hoping for a bigger overhaul of the app would happen - it didn't. Not that there is anything wrong with it, but it doesn't hav a few things that I would like. I don't have the original box, but is small enough to pack well. Happy to ship at buyers expense (should be less than $20 I expect).
  11. Hi All, Have been following online for a while, and finally have decided to start making tweaks/changes to my system. Had my system for about 4 years, but have since moved house and am mostly happy(ish) with it in the new space. i'm running Rotel RA-1570 and RC-1570. About 300 or so LP's in my collection that play on an 15 year old Pro-ject Debut III (OM10 cart). Digital through RasPi running moOde audio. All running through B&W 685 S2 and a Sunfire SDS10 sub The closest thing to a hifi store in Launceston is JB or Harvey Norman, so I either have to go to Hobart (Quantum - where all my gear has come from so far) or travel to Melbourne or Sydney. Will be seeking advice from the forum on sorting out some room issue, potential upgrades and possibly store recommendations (for when I can travel again). Hoping to pick up some great gear from the other forum users and hopefully move some of things that are not longer required at my end. cheers, pete
×
×
  • Create New...
To Top