Jump to content

Wobba

Member
  • Posts

    149
  • Joined

  • Last visited

Reputation

48 Excellent

Profile Fields

  • Region
    Australia
  • Location
    Victoria

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Isotek Polaris EVO3 Power Filter Removes Common Mode and Differential Mode mains noise. RFI reduction 30dB. Independent outlets stop Differential Mode cross contamination. Unique delta filter topology improves product performance. 13,500A of instantaneous protection, featuring IsoTek’s unique sequential protection system. Internal wiring; multi-strand silver-plated OFC copper with PTFE dielectric. 6 x AU sockets. Maximum continues power 2,300W.
  2. Techflex Flexo 1/2" Expandable Sleeving Black Info provided by manufacturer: Flexo is a strong expandable sleeving that not only provides a professional look but also protects cables, wires and hoses from abrasion, cuts and ultra-violet light. Key Features: Professional look for custom cable assemblies Bundles cables and organizes wires Easy to install, lightweight and flexible Abrasion, chemical and U/V resistant Wide operating temperature Based on my usage to date, I estimate that there should be over 400ft on the roll.
  3. Xindak XF500E Power Filter / Surge Protector Max Spike Voltage: 3000V Max Clamping Voltage (4X20s): 470V Max Surge Current (4X20s): 1000A Noise Filter: -10dB~-55dB(2-100 MHz) Rating: AC250V 6A Max. Output sockets for preamplifier/accessories: 3A Output sockets for power amplifier: 5A Dimensions: 367x118x83mm Weight: 3 Kg A GPO with two outlets has been added which are directly connected to mains, bypassing the filter stage.
  4. Pi4 in Argon Neo Case running RopieeeXL Roon, DLNA, Airplay, Spotify streaming I used this with an external DAC as a temporary solution while awaiting delivery of the recently released Bluesound Powernode. Purchased a few months ago from an Aussie retailer, comprising: Raspberry Pi 4 Model B 2GB Argon NEO Raspberry Pi 4 Case Raspberry Pi 4 Power Supply (Official) - USB-C 5.1V 15.3W Sandisk 32GB Ultra II MicroSD All items supplied with original boxes/documentation
  5. Autex Quietspace Acoustic Panels High performance, commercial-grade acoustic absorption panels 14 panels in total Each panel measures 595 x 595 x 25mm White Brand new Retail $80 each Data Sheet: https://ceilingdistributors.com.au/wp-content/uploads/2017/09/QS-Panel-Datasheet-Nov18-CP.pdf Image below shows the panels as currently installed in my cinema. They have been attached to the rear door using double-sided removable strips. Note: The 14 offered for sale have never been unpacked and are supplied in the original box.
  6. Soundking PA / Powermixer Powermixer 2x100W / 4ohm Inputs: 2 x mono, 2 x stereo 7-band EQ 16 DSP programs Speakers (pair) 8" woofer / horn tweeter Surprisingly good sounding system. Plays loud and clean. Brilliant for parties.
  7. Possibly one of the best price/performance ratio in DAC's at present. Super quiet, very high dynamic range and fuss free operation. I have owned many brands of DACs (SMSL, Soncoz, Khadas ... to name a few) and the D30Pro has proven to be the most stable/trouble free. This unit was supplied by an Aussie Topping distributor in July 2021 and used for a short time while I was changing/upgrading my system. It looks as good as new. Supplied in the original box including: Power cable, USB cable, RC-15 Remote, Manuals
  8. Cabasse Baltic Evolution Speakers The Cabasse Baltic is one of the most unique speakers on the market incorporating a woofer, midrange and tweeter in a single tri-axial drive unit mounted in a spherical enclosure. The Baltic's spherical enclosure combines incredible rigidity with excellent self-damping and broad dispersion. Despite its size (a little larger than a soccer ball) the Baltic is a true three-way, coincident system, delivering bandwidth from 80-25,000Hz, with all the time and phase benefits that is unique to this design. A matching Thor II subwoofer is available for an additional $1400. The benefit of delivering low bass using a subwoofer is that it allows for flexible room placement, minimising the effect of room nodes and maximising bass performance. The Baltic's are the closest thing you will hear to electrostatics without the complexities and reliability concerns. Possibly the best attribute of this system is that it looks amazing in your room, in contrast to the ubiquitous box design, and has very high WAF Superb condition. Audition available. Pickup only. New replacement cost for the combo is over $30k. SPECIFICATIONS Cabasse Baltic Evolution speakers Drivers: 28mm tweeter; 10cm midrange; 21 cm Duocell® woofer Efficiency: 90 dB Filter: 800 – 3500 Hz Frequency response: 80 – 25000 Hz Nominal impedance: 8 ohms Minimum impedance: 3.2 ohms Power handling: 220W Peak power handling: 1540W Dimensions (H x W x D): 1320 x 320 x 420 mm EA Weight: 19kg EA Cabasse Thor II subwoofer Reflex-loaded powered subwoofer. Drive-unit: 12" Duocell-cone woofer. Inputs: 2 low-level, 2 high-level. Low-pass filter range: 40–180Hz. Phase: switchable, 0/180°. Frequency range: 22–200Hz. Maximum power output: 250W. P Peak output power: 750W Dimensions: (H x W x D): 565 x 385 x 590mm Weight: 24kg
  9. Onkyo Integra T-4700 Am/FM Tuner First owner from new. Highly regarded with a tuner section built from all discrete components. Supplied with IR remote and manual. Specifications: Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Digital FM Tuning Range: 87.5 to 108 MHz MW Tuning Range: 530 to 1710 kHz Sensitivity: 0.9uV (FM), 25uV (MW) Signal to Noise Ratio: 77dB (FM), 40dB (MW) Distortion: 0.07% (FM), 0.7% (MW) Selectivity: 60dB (FM) Frequency response: 30Hz to 15kHz (FM) Output: 1000mV (FM), 300mV (MW) Dimensions: 435 x 92 x 366mm Weight: 5.2kg Link to more info: https://www.fmtunerinfo.com/onkyo.html
  10. PURIFI EIGENTAKT STEREO POWER AMP I have been using this amp for around 12 months and it has been superbly reliable. It is extremely quiet, runs cool and is in perfect condition. SPECIFICATIONS: Power Output: 2 ohms 450W rms / 4 ohms 425W rms / 8 ohms 227W rms Current Output: ~25 A THD+N: <0.00017% @ 100W 4 ohms 20-20kHz Dynamic Range: ~131dB Output Noise: 11.5uV(A) Efficiency: >94% Dimensions: W340 x D245 x H95mm FEATURES: Purifi 1ET400A power amp modules Purifi EVAL1 front-end board Hypex SMPS1200 power supply Furutech IEC receptacle and fuse Furutech OCC cable used for internal speaker wiring ETI copper speaker binding posts Italian case Standby function High build quality with careful attention to detail (key internal wiring is short & direct)
  11. Onkyo Integra T-4700 Am/FM Tuner First owner from new. Well regarded tuners of the era. I believe the tuner section in this model is built from all discrete components. Supplied with IR remote and manual. Specifications: Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Digital FM Tuning Range: 87.5 to 108 MHz MW Tuning Range: 530 to 1710 kHz Sensitivity: 0.9uV (FM), 25uV (MW) Signal to Noise Ratio: 77dB (FM), 40dB (MW) Distortion: 0.07% (FM), 0.7% (MW) Selectivity: 60dB (FM) Frequency response: 30Hz to 15kHz (FM) Output: 1000mV (FM), 300mV (MW) Dimensions: 435 x 92 x 366mm Weight: 5.2kg
  12. These were purchased from Selby Acoustics and used for only a short time. They are both in brand new condition. Stands have been filled with garnet sand to minimise resonance. Link to more info: https://www.selby.com.au/brands/solidsteel/solidsteel-ss-7-speaker-stands.html
  13. The Hypex NC252MP based amp is a compact design and outputs 250W into 4ohms. The Purifi 1ET400A based amp is considerably more powerful at 425W into 4 ohms. Even so, the NC252MP establishes a high bar and performs at a fairly high level. The Purifi 1ET400A based amp is just better across the board. It is also quieter and has a more refined top end. And the higher output will drive difficult loads with greater ease.
  14. PURIFI STEREO POWER AMP I have been using this amp for around 12 months and it has been superbly reliable. It is extremely quiet, runs cool and is without blemish. SPECIFICATIONS: Power Output: 2 ohms 450W rms / 4 ohms 425W rms / 8 ohms 227W rms Current Output: ~25 A THD+N: <0.00017% @ 100W 4 ohms 20-20kHz Dynamic Range: ~131dB Output Noise: 11.5uV(A) Efficiency: >94% Dimensions: W340 x D245 x H95mm FEATURES: Purifi 1ET400A power amp modules Purifi EVAL1 front-end board Hypex SMPS1200 power supply Furutech IEC receptacle and fuse Furutech OCC cable used for internal speaker wiring ETI copper speaker binding posts AC mains directly connected to SMPS (5V supply used for standby on/off) High build quality with careful attention to detail (key internal wiring is short & direct)
×
×
  • Create New...
To Top