Jump to content

Grieveman

Member
  • Posts

    73
  • Joined

  • Last visited

Reputation

23 Excellent

Profile Fields

  • Region
    Australia
  • Location
    Melbourne
  • First Name
    Brendan

Recent Profile Visitors

2,044 profile views
  1. Further information: For sale is one pair of 2m long Ortofon Premium SPK-X7 speaker cables. These are moderately thick cables (around 17mm diameter) but quite flexible. They are in very good condition, no fraying or scratches. Ortofon info: ORTOFON Premium SPK-X7 Speaker Cables Ortofon Premium SPK-X7 speaker cable with Helical Round Multi Conductor is the best speaker cable at a lower cost. The brilliant and dynamic sound, high transparency the sparkling tonality with the razor sharp detail is another of the proud Ortofon creations - the best speaker cable at a lower cost. It is made of the very best material - the silver plated OFC, PCOCC, with a cross sectional area of 3.5mm square on the both (+) and (-) sides. At the ends of the 17mm diameter cable are the rhodium plated “Y” terminals. It delivers the sound with the utmost fidelity from the highest to the lowest frequency. Technical data: Conductor size: 2 x 3.5 mm² Conductor material detail: S Ag-p-OFC, PCOCC, Cu Conductor detail: 1/1.2, 30/.18, 0.1/1, 7/10/0.1, 7/15/0.08 (x2) Cable diameter: φ 17.0 mm DC Resistance: Less than 4.8 Ω/km DC Shield resistance: AC 500V/1min Insulation: PE Length 2 x 2 m Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
  2. Further information: This is a 3m pair of Krispy Audio stage 3 speaker cables. They are bi-wired and "shot-gunned" at one end, suitable for a stereo amp to bi-wired speakers - i.e. 2 into 4 wires. They are z-type (BFA) gold plated banana plugs at each end. Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
  3. Further information: I'm selling one set of my PMCs. They are a walnut pair of Twenty.22 bookshelf speakers in excellent condition and working perfectly. Great bookshelf speakers, very dynamic and spacious sounding with really good bass extension thanks to the ATL. Bi-wire/amp-able if you want. Prefer local pickup in Melbourne (or I could possibly drop-off if not too far away) as I don't have the original boxes. Crossover Frequency:1.8kHz Dimensions:H 410mm 16.14” W 184mm 7.25” D 367mm 14.45” (+6mm grille) Drive Units:LF PMC twenty series, lightweight doped 6.5”/170mm cone with cast alloy chassis HF PMC/SEAS®, 27mm twenty series, SONOLEX™ soft dome, Ferrofluid cooled Effective ATL™ Length:2.0m 6.5ft Frequency Response:40Hz – 25kHz Impedance:8 Ohm Input Connectors:2 pairs 4mm sockets (Bi-amp or Bi-wire) sensitivity:90dB 1w 1m Weight:8kg 17.6 lbs Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
  4. I have some PMC 20.22 in excellent condition you can have for $2200 (in Vic)
  5. https://www.stereo.net.au/forums/forum/261-classifieds-audio-visual-accessories-only/
  6. I have 2 sets of XLRs I can sell: 1m Chord Chorus which you can have for $150 or 0.75m Inakustik Reference NF-803 XLR which you can have for $350
  7. Further information: Great power amp with exactly the sound you expect from PS Audio. I also have a BHK250 amp and considering this is less than a quarter of the price it can certainly be compared; same sound, just a bit less of it. Runs my PMC 25.26 speakers without any problems. The main reason I am selling this is just so that my secondary system is something different, not just a smaller version of my main system, otherwise this amp would be a keeper. Come with original box for shipping. Overview: https://www.psaudio.com/products/stellar-s300-power-amplifier/#tab-description Specs: https://www.psaudio.com/products/stellar-s300-power-amplifier/#tab-specs Photos: PLEASE READ If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved
  8. Further information: 1 pair of Inakustik NF-803 XLR cables - 75cm meter in length. Excellent condition. First owner. Photos: PLEASE READ If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved
  9. I got a response back from Michell Engineering (see below) which allowed me to get the 33RPM set correctly. 45 won't drop below 50 no matter how much I turn that screw, but I guess I can just swap the pulley. "To adjust the speed remove the rear cover of the controller. The cover is held in place by the 2 phillips head screws either side of the transformer cover on the front of the rear plate. With the cover removed and the circuit board directly in front of you, you will see 2 adjustable potentiometers in the centre of the board. So to adjust the speed, with the Green LED lit adjust the 33 speed with the pot on the right clockwise to increase, anti clockwise to decrease. With the Red LED lit, adjust the 45 speed in the same way. Hope all is clear."
  10. I have a 3m Ugly subwoofer cable you can have for $20
×
×
  • Create New...
To Top