-
Posts
506 -
Joined
-
Last visited
givita_burl's Achievements
37 ads
-
Emotiva XMC-1 AV Processor
By givita_burl in AV Receivers & Processors
I have simplified my home theatre setup to a single AV receiver. 7.2 channel fully balanced AV processor, with a focus on sound quality including a reference stereo mode and Dirac Live for Emotiva room correction. Flexible configuration, with both XLR and RCA outputs, 7.1 channel input, various digital audio inputs (8 HDMI, coax, optical, AES-EBU, USB). 2 HDMI out. It includes accessories included in photo - manuals, remote control, EMM-1 measurement microphone and USB cable.0 comments
Submitted
-
QED Reference XLR 40 Interconnect Cables (XLR)
By givita_burl in Interconnects
QED Reference 40 XLR interconnects in 1m length. Product details at: https://www.qed.co.uk/reference-xlr-40-analogue.html I purchased these for a pre-processor/power amp home theatre setup but didn't use all channels. I have now settled on a receiver so I don't expect I will use these cables in future. Pickup or Auspost satchel at buyer's expense ($15).0 comments
Submitted
-
Paradigm SA-LCR3 v.3 In-Wall Loudspeakers
By givita_burl in Installed / Surround / Dedicated Cinema
Single speaker. I purchased a pair of these, however one was damaged. I thought I would use this as a centre speaker...but didn't, and I doubt that I will. Still new in box. 4-driver, 3-way in-wall speaker. Crossover: 3rd-order electro-acoustic at 2.5kHz; 2nd-order electro-acoustic at 450Hz (bass drivers). HF driver: 25mm (1 in) G-PAL™ dome; MF driver: 115mm S-PAL™ cone, 25mm voice-coil; LF drivers: two 178mm mineral-filled polypropylene cones, 38mm voice-coils. Frequency r0 comments
Submitted
-
EXPIRED QED Reference XLR 40 Interconnect Cables (XLR)
By givita_burl in Interconnects
QED Reference 40 XLR interconnects in 1m length. Product details at: https://www.qed.co.uk/reference-xlr-40-analogue.html I purchased these for a pre-processor/power amp home theatre setup but didn't use all channels. I have now settled on a receiver so I don't expect I will use these cables in future. Pickup or Auspost satchel at buyer's expense ($15).0 comments
Updated
-
EXPIRED Paradigm SA-LCR3 v.3 In-Wall Loudspeakers
By givita_burl in Installed / Surround / Dedicated Cinema
Single speaker. I purchased a pair of these, however one was damaged. I thought I would use this as a centre speaker...but didn't, and I doubt that I will. Still new in box. 4-driver, 3-way in-wall speaker. Crossover: 3rd-order electro-acoustic at 2.5kHz; 2nd-order electro-acoustic at 450Hz (bass drivers). HF driver: 25mm (1 in) G-PAL™ dome; MF driver: 115mm S-PAL™ cone, 25mm voice-coil; LF drivers: two 178mm mineral-filled polypropylene cones, 38mm voice-coils. Frequency r0 comments
Updated
-
EXPIRED Halcro Logic MC50 5 Channel Amplifier
By givita_burl in Multi Channel Amplifiers
Nice, clean sound and 350 watts per channel of reliable power across five discrete Class D modules. Unbalanced or balanced inputs, selectable via toggle switches. Claimed distortion THD: <0.007% at 1kHz at all powers up to 350W into 4 Ohms. No longer required as I have simplified my home theatre setup to rely on an AV receiver. Also happily used for two-channel listening. Weight is 25.0 kg and unit dimensions are 438mm x 169mm x 410mm (whd). Approx. ~28kg packed.0 comments
Submitted
-
Sherwood Newcastle A-965/P-965 7 Channel Pre / Power Combination
By givita_burl in AV Receivers & Processors
Sherwood Newcastle A-965 7-ch power amplifier and matching P-965 AV tuner pre-amplifier. Don't mistake these units for the standard Sherwood range - these were pitched to a higher tier and perform very capably! A-965 Power output, stereo mode, 8 ohm, THD 0.02%, 1 kHz - 2 x 125W; ALL channels driven - 7 x 100W. Wide Range Amplifier Stage (WRAS) up to 200kHz h; modular design with 7 separate monoblock amplifiers built-on individual PCB cards; 2 separate power transformers (to0 comments
Submitted
-
EXPIRED Paradigm SA-LCR3 v.3 In-Wall Loudspeakers
By givita_burl in Installed / Surround / Dedicated Cinema
I purchased a pair of these, however one was damaged. I thought I would use this as a centre speaker...but didn't, and I doubt that I will. Still new in box. 4-driver, 3-way in-wall speaker. Crossover: 3rd-order electro-acoustic at 2.5kHz; 2nd-order electro-acoustic at 450Hz (bass drivers). HF driver: 25mm (1 in) G-PAL™ dome; MF driver: 115mm S-PAL™ cone, 25mm voice-coil; LF drivers: two 178mm mineral-filled polypropylene cones, 38mm voice-coils. Frequency response: on-axisUpdated
-
Robertson Audio Pure Silver (Diamond range) Interconnect Cables (XLR)
By givita_burl in Interconnects
Robertson Audio Cables Pure Silver (Diamond) XLR interconnects in 1m length. Great value option. Product details at: https://robertsonaudiocables.com.au/products/pure-silver-balanced-symmetrical-xlr-interconnect-cables?variant=12883309527101 Pickup or Auspost satchel at buyer's expense ($15).Submitted
-
EXPIRED Halcro Logic MC50 5 Channel Amplifier
By givita_burl in Multi Channel Amplifiers
Nice, clean sound and 350 watts per channel of reliable power across five discrete Class D modules. Unbalanced or balanced inputs, selectable via toggle switches. Claimed distortion THD: <0.007% at 1kHz at all powers up to 350W into 4 Ohms. No longer required as I have simplified my home theatre setup to rely on an AV receiver. Also happily used for two-channel listening. Weight is 25.0 kg and unit dimensions are 438mm x 169mm x 410mm (whd). Approx. ~28kg packed.0 comments
Submitted
-
EXPIRED Sherwood Newcastle A-965/P-965 7 Channel Pre / Power Combination
By givita_burl in AV Receivers & Processors
Sherwood Newcastle A-965 7-ch power amplifier and matching P-965 AV tuner pre-amplifier. Don't mistake these units for the standard Sherwood range - these were pitched to a higher tier and perform very capably! A-965 Power output, stereo mode, 8 ohm, THD 0.02%, 1 kHz - 2 x 125W; ALL channels driven - 7 x 100W. Wide Range Amplifier Stage (WRAS) up to 200kHz h; modular design with 7 separate monoblock amplifiers built-on individual PCB cards; 2 separate power transformers (to0 comments
Submitted
-
Soundstyle XS310 AV Rack / Cabinet
By givita_burl in Racks & Cabinets
Soundstyle XS310 AV rack. Dimensions: 1022w (921w inner) x 618h x 488d. Fixed height shelves at 225h & 225h; max loading per shelf 95kg; max loading total 200kg. Legs can be filled to improve damping if desired. Powder coating exhibits some crazing but (I think) presents well enough. From the manufacturer: The multi-award winning XS series sets new standards in performance, style and price. The XS310 is a specially designed to accommodate 4 pieces of equipment and0 comments
Submitted
-
EXPIRED Sherwood Newcastle A-965/P-965 7 Channel Pre / Power Combination
By givita_burl in AV Receivers & Processors
Sherwood Newcastle A-965 7-ch power amplifier and matching P-965 AV tuner pre-amplifier. Don't mistake these units for the standard Sherwood range - these were pitched to a higher tier and perform very capably! A-965 Power output, stereo mode, 8 ohm, THD 0.02%, 1 kHz - 2 x 125W; ALL channels driven - 7 x 100W. Wide Range Amplifier Stage (WRAS) up to 200kHz h; modular design with 7 separate monoblock amplifiers built-on individual PCB cards; 2 separate power transformers (to0 comments
Submitted
-
EXPIRED Halcro Logic MC50 5 Channel Amplifier
By givita_burl in Multi Channel Amplifiers
Nice, clean sound and 350 watts per channel of reliable power across five discrete Class D modules. Unbalanced or balanced inputs, selectable via toggle switches. Claimed distortion THD: <0.007% at 1kHz at all powers up to 350W into 4 Ohms. No longer required as I have simplified my home theatre setup to rely on an AV receiver. Also happily used for two-channel listening. Weight is 25.0 kg and unit dimensions are 438mm x 169mm x 410mm (whd). Approx. ~28kg packed.0 comments
Submitted
-
EXPIRED Soundstyle XS310 AV Rack / Cabinet
By givita_burl in Racks & Cabinets
Soundstyle XS310 AV rack. Dimensions: 1022w (921w inner) x 618h x 488d. Fixed height shelves at 225h & 225h; max loading per shelf 95kg; max loading total 200kg. Legs can be filled to improve damping if desired. Powder coating exhibits some crazing but (I think) presents well enough. From the manufacturer: The multi-award winning XS series sets new standards in performance, style and price. The XS310 is a specially designed to accommodate 4 pieces of equipment and0 comments
Submitted